Inner Drag Link for 2005-2010 Ford F-250 Super Duty & More - Dorman DL85069RD

$111.99

Vehicles this part fits

    Part number: DL85069RD
    UPC: 889245589774
    Condition: New
    Weight: 12.40 LBS
    Item Package Quantity: 1
    $111.99
    Adding to cart… The item has been added

    Have questions?

    Dorman - OE Solutions Steering Drag Link P/N:DL85069RD
    Dorman - OE Solutions Steering Drag Link P/N:DL85069RD
    $111.99
    $111.99

    Dorman DL85069RD inner drag link for the 2005-2010 Ford F-250 Super Duty and other vehicles carries steering motion from the pitman arm toward the wheels. It replaces a failed original drag link in severe-duty service.

    • Dorman RD (rugged duty) line, built for severe-duty work such as off-road use, heavy hauling and towing
    • Bearing housing of quenched and tempered steel with a protective coating for corrosion resistance
    • Necessary mounting hardware included, with a corrosion-resistant coating
    • Joints pre-loaded with grease in grease boots with molded-in standoffs, where applicable
    • Designed and manufactured to strict specifications for reliable performance

    Quick facts

    • Part: Dorman DL85069RD drag link
    • Also called: steering drag link
    • Fits: 2005-2010 Ford F-250 Super Duty and other vehicles
    • Position: Inner, at pitman arm
    • Material: Steel
    • Condition: New

    Loose or wandering steering, play at the wheel or clunks from the steering linkage can be signs of a worn drag link. Worn tie rod ends, ball joints, a loose pitman arm or a worn steering gear can be behind the same signs, so find the cause before buying. If the drag link is the cause, this one replaces it.

    Fits

    It is a drag link for the 2005-2010 Ford F-250 Super Duty, the 2005-2009 Ford F-250 and the 2005-2010 Ford F-350 Super Duty, made to fit the way the OE design does on these trucks. Only one goes on a truck, at the pitman arm.

    Specifications

    Fit and size

    • Position: inner, at pitman arm
    • Quantity per vehicle: 1
    • Length and centerline length: 890.8 mm
    • Mounting hole diameter: 15 mm
    • Maximum diameter: 29 mm
    • Stud thread diameter: 16 mm
    • End 1 attachment: threaded
    • End 2 attachment: taper

    Build and materials

    • Material: steel
    • Finish: e-coated
    • Grade: standard replacement
    • Mounting hardware: included
    • Grease fitting: included
    • Condition: new
    • Country of origin: China

    In the box

    One drag link, one ball joint, one Zerk fitting, one cotter pin and one castle nut.

    Interchange: TA5749 · 5C3Z3304BA · 6C3Z3304B · 7C3Z3304B · AC3Z3304B · LC3Z3304A · DS300037 · DS80749 · TXMS40451

    This part cross-references / interchanges with the following part numbers:

    TA5749, 5C3Z3304BA, 6C3Z3304B, 7C3Z3304B, AC3Z3304B, LC3Z3304A, DS300037, DS80749, TXMS40451

    Frequently Asked Questions

    Does Dorman DL85069RD work as a drag link for the 2005-2009 Ford F-250?

    Yes. Dorman DL85069RD is listed for the 2005-2009 Ford F-250, and also for the 2005-2010 Ford F-250 Super Duty.

    What comes with this steering drag link?

    Dorman DL85069RD comes with the drag link, a ball joint, a Zerk fitting, a cotter pin and a castle nut. Mounting hardware and the grease fitting are included.

    How long is this inner drag link from center to center?

    The centerline length is 890.8 mm, the same as the overall length. The mounting hole diameter is 15 mm and the maximum diameter is 29 mm.

    How can I tell if the joints on an inner drag link are worn?

    A shop can check the joints for play and torn grease boots, since that means getting under the truck. While driving, you may notice loose or wandering steering or a clunk from the linkage.

    Does Dorman DL85069RD replace the 5C3Z3304BA drag link?

    Yes. 5C3Z3304BA is one of the numbers Dorman DL85069RD replaces, along with 6C3Z3304B and 7C3Z3304B.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review