Help keep suspension movement tight and controlled with the Dorman ball joint 540-018, a direct-fit front lower replacement for the 2002 Ford Thunderbird, the 1999-2002 Jaguar S-Type, and the 2000-2002 Lincoln LS (2 used per vehicle). A ball joint is the pivoting connection between the control arm and steering knuckle, letting the front lower suspension articulate through travel and steering while carrying load.
This Dorman suspension ball joint is precision-engineered and tested as a replacement for the original unit on the listed applications.
- Steel construction with a rubber dust boot: built to strict quality standards using steel and rubber materials.
- Greaseable: includes a zerk (grease) fitting so the joint can be relubricated in service.
- Tapered, threaded stud: conical taper stud with a 14 mm thread and 1.5 mm pitch; 12 mm wrench size.
- Press-in design: a ball-joint press tool is normally required for installation.
The package includes the ball joint, one nut, and one zerk fitting; bushings are not included. Signs the joint may need replacing include clunking on acceleration or over the road, loose or wandering steering, and uneven tire wear. Sold individually; replacing both sides together as a matched pair is recommended. Country of origin: Turkey.
Interchange: 101-7013 · 101-7137 · 610.20007 · 610.61014
1017013 · 1017137 · 61020007 · 61061014 · 45D2431 · 46D2431A · TC2904 · BJB550 · XR80304010BJ · K500084 · FA2390E · GS40502 · MS40501 · MS40502 · JBJ1046
This part cross-references / interchanges with the following part numbers:
45D2431, 46D2431A, 101-7013, 101-7137, 610.20007, 610.61014, TC2904, BJB550, XR80304010BJ, K500084, FA2390E, GS40502, MS40501, MS40502, JBJ1046
Frequently Asked Questions
Is this the right ball joint for a 2000-2002 Lincoln LS?
Yes. It is a front lower direct-fit ball joint for the 2000-2002 Lincoln LS, with 2 used per vehicle. It also fits the 2002 Ford Thunderbird and 1999-2002 Jaguar S-Type.
Is this ball joint greaseable?
Yes. This ball joint includes a zerk (grease) fitting, so it can be relubricated during service. A nut is also included; bushings are not.
How many do I need per vehicle?
The listed applications use 2 per vehicle. It's sold individually, and replacing both sides together as a matched pair is recommended for balanced suspension.
How is this ball joint installed?
It uses a press-in design, so a ball-joint press tool is normally required for installation. Consult the vehicle service information for the correct procedure and torque specs.
What's included in the package?
The package contains one ball joint, one nut, and one zerk fitting. Bushings and washers are not included.
