Keep the front wheel located and the suspension moving as designed with the Dorman control arm 520-255, a front left lower control arm with ball joint that fits the 1995-1998 Ford Windstar. It directly replaces the original assembly, so a worn arm and a worn joint are handled in one job. See the "Vehicles it fits" section for engine details.
Each Dorman suspension control arm and ball joint assembly arrives with its key components already in place:
- Direct replacement: designed to directly replace the original arm on the listed Windstar applications.
- Pre-installed components: the ball joint and bushings come already installed, saving time and labor.
- Tested engineering: put through an industry-leading evaluation process aimed at a smooth, stable ride, directional stability and predictable handling.
- Corrosion protection: additional coatings help resist rust and corrosion.
As a Dorman lower control arm for the front left position, it links the wheel assembly to the vehicle and lets the suspension travel up and down. It also helps hold the wheel in alignment, and its ball joint gives the steering knuckle a pivot point. Signs the arm may need replacing include clunking over bumps, loose or wandering steering, uneven tire wear, cracked bushings and ball joint play. Similar symptoms can come from other suspension parts, so diagnose the cause before replacing. This listing covers the front left lower arm, and replacing both sides together is recommended for balanced handling.
Interchange: 623.65080
62365080 · CB8681 · K8681 · TC1722 · CA2042 · F58Z3079A · F78Z3079CA · CK8681 · RK8681 · FA4035 · GK8681 · CMK8681 · 2605093 · 2605093M · 2CB40016 · JTC1573
This part cross-references / interchanges with the following part numbers:
CB8681, 623.65080, K8681, TC1722, CA2042, F58Z3079A, F78Z3079CA, CK8681, RK8681, FA4035, GK8681, CMK8681, 2605093, 2605093M, 2CB40016, JTC1573
Frequently Asked Questions
Will this fit my 1995-1998 Ford Windstar?
Yes. The Dorman 520-255 is a direct-fit replacement for the front left lower position on the 1995-1998 Ford Windstar. Check the "Vehicles it fits" section for engine details.
What does a lower control arm do?
It links the wheel assembly to the vehicle, lets the suspension move up and down, and helps hold the wheel in alignment. Its ball joint gives the steering knuckle a pivot point.
What comes pre-installed on this Dorman suspension control arm?
The ball joint and bushings come pre-installed, so the arm goes in as one unit and saves time and labor.
What are signs this control arm may need replacing?
Clunking over bumps, loose or wandering steering, uneven tire wear, cracked bushings or ball joint play may be signs. Diagnose the cause first, because other suspension parts can cause similar symptoms.
Do I need an alignment after installing it?
A wheel alignment is recommended after you replace a control arm. Follow the vehicle service information for fastener torque, reuse of fasteners and the installation steps.
