Dorman 520-497 front left lower control arm with ball joint for the 2009-2020 Dodge Journey and other vehicles links the front left wheel to the frame and lets the wheel move with the suspension. This Dorman OE Solutions control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications.
- Ball joint and bushings pre-installed to save time and labor
- Pre-greased ball joint with a threaded stud, 14 mm thread diameter
- Steel control arm with rubber bushings
- Additional coatings for rust and corrosion resistance
- Tested through an evaluation process aimed at a smooth ride and directional stability
Quick facts
- Part: Dorman 520-497 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2009-2020 Dodge Journey and other vehicles
- Position: Front left lower
- Material: Steel
- Condition: New
A clunk over bumps, uneven tire wear or a car that wanders can mean a worn lower control arm or ball joint. Before you replace this arm, rule out worn tie rod ends, sway bar links, shocks or struts and a wheel alignment problem, since they can show similar signs.
Fits
This control arm is listed for a wide range of Dodge and Chrysler models, led by the 2009-2020 Dodge Journey, the 2008-2014 Dodge Avenger and the 2011-2014 Chrysler 200. This listing is one arm for the front left; the front right is a separate part, and the two sides are normally replaced together.
Specifications
Fit and size
- Position: Front left lower
- Quantity per vehicle: 1
- Mounting hole diameter: 12.3 mm
- Ball joint thread diameter: 14 mm
- Maximum width: 288.5 mm
- Maximum length: 237 mm
Build and materials
- Control arm type: casting/forged
- Control arm material: steel
- Bushing material: rubber
- Ball joint stud: threaded, machined mounting type
- Pre-greased: yes
- Grade: standard replacement
- Condition: new
- Country of origin: Taiwan
In the box
One front left lower control arm with ball joint, plus mounting hardware. A grease fitting is not included. This listing holds one arm, and the front left takes one.
Frequently Asked Questions
Is Dorman 520-497 a control arm with ball joint for the 2008-2014 Dodge Avenger?
Yes. Dorman 520-497 fits the 2008-2014 Dodge Avenger as the front left lower control arm. If your car is not named on this page, look it up in the "Vehicles it fits" section.
Does Dorman 520-497 come with the ball joint and bushings already installed?
Yes. Dorman 520-497 arrives with the ball joint and bushings pre-installed, and mounting hardware is included. A grease fitting is not included.
What thread size does the ball joint stud on this control arm have?
The ball joint stud is threaded, with a 14 mm thread diameter. The mounting hole on the arm measures 12.3 mm.
How can I tell if a front left lower control arm is worn?
Torn bushing rubber, heavy rust on the arm or a loose feel in the steering can mean wear. A shop can test the ball joint for play.
How is the Dorman 520-497 control arm tested?
Dorman 520-497 goes through an evaluation and testing process aimed at a smooth, stable ride and directional stability. Its additional coatings add rust and corrosion resistance.
