Dorman - OE Solutions Suspension Control Arm and Ball Joint Assembly P/N:522-802
Dorman 522-007 rear left lower control arm with ball joint for the 2005-2012 Nissan Pathfinder and other vehicles links the wheel to the chassis. This Dorman suspension control arm and ball joint assembly replaces the original assembly.
A clunk or knock from the rear suspension over bumps, or uneven tire wear, can mean a worn control arm or ball joint. A worn shock or wheel bearing can give similar signs, so find the cause before buying. This Dorman lower control arm is one rear left arm; the rear right is separate, and both sides are normally replaced together.
The vehicles it fits include the 2005-2012 Nissan Pathfinder, the 2005-2015 Nissan Armada and the 2004-2010 Infiniti QX56, and each takes one for the rear left. Driving something else? Look up your year and model under the "Vehicles it fits" section.
Fit and size
Build and materials
One control arm with ball joint, bushings and mounting hardware. A grease fitting is not included.
Interchange: TC6106 · CA12629 · 9CB30323 · RK642561 · GS301102 · CMS301102 · 2607300 · 551A1EA500 · 551A1ZQ00A · SK522007
This part cross-references / interchanges with the following part numbers:
Is this the right Nissan Pathfinder control arm for a 2005-2012 Nissan Pathfinder?
Yes. Dorman 522-007 fits the 2005-2012 Nissan Pathfinder as the rear left lower forward arm, one for that side. For another car, look it up under the "Vehicles it fits" section.
Are Dorman control arm bushings included with this arm?
Yes. Dorman 522-007 comes with its ball joint, rubber bushings and mounting hardware. A grease fitting is not included.
Is this Dorman control arm made of steel?
Yes. The control arm is boxed steel with rubber bushings, and additional coatings resist rust and corrosion.
How can I tell if the ball joint on a rear left control arm is worn?
A clunk over bumps or uneven tire wear can point to a worn ball joint or bushing, and cracked or torn rubber shows on a visual check. A shop can test the joint for play.
What size is the ball joint thread on Dorman 522-007?
The ball joint on this arm has a 14.5 mm thread diameter and a pinch-type stud. The arm's mounting hole is 12.3 mm.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.