Dorman 526-676 front right lower control arm with ball joint for the 2018-2023 Hyundai Kona links the steering knuckle to the body and lets the wheel move with the suspension. This Dorman control arm and ball joint assembly directly replaces the original on this vehicle.
- Ball joint and bushings come pre-installed, which saves time and labor
- Stamped steel arm with rubber bushings
- Additional coatings give rust and corrosion resistance
- Pre-greased ball joint with a threaded 12 mm stud
- Evaluation process aimed at a smooth ride, directional stability and predictable dynamics
- Part of the Dorman OE Solutions line
Quick facts
- Part: Dorman 526-676 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2018-2023 Hyundai Kona
- Position: Front right lower
- Material: Steel control arm, rubber bushings
- Condition: New
A clunk over bumps, loose steering feel or uneven tire wear can mean a worn arm, bushing or ball joint. These signs alone do not prove this arm is the problem, since a worn tie rod end can cause a similar clunk. Both front lower arms are normally replaced together, and this listing is one arm for the right side.
Fits
This arm is a direct-fit replacement for the 2018-2023 Hyundai Kona.
Specifications
Fit and size
- Position: front right lower
- Quantity per vehicle: 1 for this side
- Mounting holes: 2, diameters 12.2 mm and 14.2 mm
- Bushing inside diameter: 12.2 mm and 14.2 mm
- Bushing length: 53.8 mm and 60 mm
- Control arm maximum length: 283.2 mm (distance between bushings 283.2 mm)
- Control arm maximum width: 60 mm
- Ball joint stud length: 20.5 mm
- Ball joint thread diameter: 12 mm
Build and materials
- Construction: stamped
- Control arm material: steel
- Bushing material: rubber
- Ball joint: installed, bolt-in mounting, threaded stud
- Greasing: pre-greased, no grease fitting
- Condition: new
- Country of origin: Turkey
In the box
One control arm with the ball joint and bushings pre-installed, and one nut. This listing is one arm; the 2018-2023 Hyundai Kona takes one on the front right, and the front left is a separate part.
Interchange: 102-8410
CA13038 · 54501J9000 · 5CB80357 · GS801223 · CMS801223 · 2608879
This part cross-references / interchanges with the following part numbers:
102-8410, CA13038, 54501J9000, 5CB80357, GS801223, CMS801223, 2608879
Frequently Asked Questions
Does the Dorman lower control arm 526-676 fit the 2018-2023 Hyundai Kona?
Yes. Dorman 526-676 is the front right lower arm for the 2018-2023 Hyundai Kona; the front left side takes a separate arm.
Is a Dorman control arm bolt included with this arm?
No bolt is listed. The package holds one control arm with its ball joint and one nut, so plan on new bolts for mounting the arm.
Does the Dorman OE Solutions control arm come with the ball joint installed?
Yes. Dorman 526-676 has the ball joint and rubber bushings pre-installed, and the ball joint is pre-greased. It has no grease fitting.
Is the Dorman OE Solutions suspension control arm coated against rust?
Yes. Additional coatings give this stamped steel arm rust and corrosion resistance.
What noises can a worn front lower control arm make?
A clunk over bumps can come from a worn bushing or ball joint. Cracked or torn bushing rubber may be visible during a tire or brake service, and a shop can check play in the joint.
