Dorman 527-142 front right lower control arm with ball joint for the 2018-2022 Honda Accord connects the wheel to the body and lets it move with the suspension. This Dorman suspension control arm and ball joint assembly directly replaces the original assembly.
- Part of the Dorman OE Solutions line
- Ball joint and bushings come pre-installed, saving time and labor
- Aluminum control arm with casting/forged construction
- Pre-greased ball joint with a threaded stud, no grease fitting
- Additional coatings for rust and corrosion resistance
- Tested for a smooth, stable and safe ride
Quick facts
- Part: Dorman 527-142 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2018-2022 Honda Accord
- Position: Front right lower
- Material: Aluminum
- Condition: New
Clunking over bumps, loose steering and uneven tire wear can mean worn bushings or a worn ball joint. Before you replace this arm, rule out other worn steering or suspension parts, tire problems and wheel alignment, since they can give similar symptoms. Front arms are normally replaced as a pair; this listing is one arm, for the front right.
Fits
This lower control arm for the 2018-2022 Honda Accord goes on the front right, which takes one arm; the front left is a separate part ordered on its own.
Specifications
Fit and size
- Position: front right lower
- Quantity per vehicle: 1
- Mounting hole diameter: 14 mm and 19 mm
- Bushing inside diameter: 16.2 mm
- Bushing length: 60 mm
- Maximum length: 394.5 mm, maximum width: 306 mm
- Distance between bushings: 306 mm
- Ball joint stud length: 21 mm
- Ball joint thread diameter: 14 mm
Build and materials
- Control arm material: aluminum
- Construction: casting/forged
- Bushing material: rubber and aluminum
- Ball joint mounting type: bolt in
- Grade: standard replacement
- Condition: new
- Country of origin: China
In the box
One control arm with its ball joint and bushings installed, one nut and one cotter pin.
Interchange: 102-8387
TC3984 · CA14897 · 51220TVAA01 · 51350TVAA04 · 9CB60478 · RK623748 · GS601269 · CMS601269 · 2608713
This part cross-references / interchanges with the following part numbers:
102-8387, TC3984, CA14897, 51220TVAA01, 51350TVAA04, 9CB60478, RK623748, GS601269, CMS601269, 2608713
Frequently Asked Questions
Which engines does this 2018-2022 Honda Accord control arm fit?
Dorman 527-142 is listed for the 2018-2022 Honda Accord with no engine restriction. It is the front right lower arm, so the left side needs its own part.
Does the Dorman control arm bolt come with this arm?
Dorman 527-142 lists no control arm bolt. The box holds one control arm with its ball joint and bushings installed, one nut and one cotter pin.
Is this Dorman control arm made of aluminum?
Yes. The control arm is aluminum, and its bushings are rubber and aluminum. The ball joint has a threaded stud, 14 mm in thread diameter and 21 mm long.
What are the signs a lower control arm is wearing out?
Clunks over bumps, loose steering and uneven tire wear can mean worn bushings or a worn ball joint. A shop can check the ball joint play and bushings for you.
Does Dorman 527-142 replace the 102-8387 arm?
Yes. 102-8387 is one of the numbers Dorman 527-142 replaces, alongside TC3984 and 2608713. Every number it replaces is on the Interchange line.
