Dorman - OE Solutions Suspension Control Arm P/N:524-562
Keep the front right wheel of your 2003-2014 Volvo XC90 securely located with this Dorman control arm, part number 520-562, from the OE Solutions line. It is cataloged for the front right lower position and is designed as a direct replacement that fits and performs like the original equipment. See the Buyer's Guide tab for engine-specific fitment details.
A lower control arm links the wheel assembly to the chassis. It lets the wheel travel up and down with the road while helping hold it in position.
You may be shopping for a Dorman lower control arm because the original has worn. Possible signs include clunking over bumps, loose or wandering steering, uneven tire wear, or vibration. These symptoms can have other causes, so have the front suspension inspected before replacing parts. This suspension control arm is sold individually for the right side, and replacing both sides together is recommended when both are worn. A wheel alignment is recommended after installation.
Interchange: 102-6635 · 623.39813
1026635 · 62339813 · TC1986 · CA8526 · 4CB10060 · RK640446 · FA4571 · GS10121 · CMS10121 · 2605675 · SRK640446 · 1527004 · X53CA4575 · JTC1675 · 31304046 · V950248 · 30639781 · 30645846 · 30681615 · 31201005 · 36012861 · 36050810
This part cross-references / interchanges with the following part numbers:
Is this the right control arm for a 2003-2014 Volvo XC90?
Dorman 520-562 is listed for the 2003-2014 Volvo XC90 in the front right lower position. Check the Buyer's Guide tab to confirm it matches your exact vehicle.
What does a lower control arm do?
It connects the wheel assembly to the chassis. This lets the wheel move up and down over bumps while helping hold it in position.
Which side and position is this arm for?
It is cataloged for the front right lower position and is sold individually. The left-side arm is a separate part.
What are signs a control arm may need replacing?
Possible signs include clunking over bumps, loose or wandering steering, uneven tire wear, and vibration. These can have other causes, so have the suspension inspected first.
Is an alignment needed after installation?
Yes, a professional wheel alignment is recommended because replacing a control arm can change alignment. Check the vehicle service information for fastener torque and whether the fasteners may be reused.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.