Dorman 522-072 front right lower control arm for the 2012-2015 Honda Crosstour and other vehicles locates the wheel and lets it move up and down with the road.
- Powder-coated steel body that resists rust and corrosion
- Rubber bushings included with the arm
- Dorman OE Solutions control arm in a standard-replacement grade
- Casting/forged arm with a press-in end 2
- Rigorous testing and quality-control checks on the arm
Quick facts
- Part: Dorman 522-072 control arm
- Also called: suspension control arm
- Fits: 2012-2015 Honda Crosstour and other vehicles
- Position: Front right lower
- Material: Steel
- Condition: New
Worn bushings or a bent arm can show up as a clunk over bumps, uneven tire wear or loose, wandering steering. Before you replace this arm, rule out a worn strut, tie rod or tire, since each of those can also make noise or wear tires unevenly.
Fits
This Dorman lower control arm is a direct replacement for the 2012-2015 Honda Crosstour and the 2010-2011 Honda Accord Crosstour. The front axle has one lower arm on each side; this listing is the right one, the left is ordered separately, and the pair is normally replaced together.
Specifications
Fit and size
- Position: Front right lower
- Quantity per vehicle: 1 (this side)
- Length: 262.5 mm
- Bushing inside diameter: 14.3 mm
- Bushing outside diameter: 39.6 mm
- Bushing length: 92 mm
- End 2 type: Press in
Build and materials
- Material: Steel
- Type: Casting/forged
- Finish: Powder coated
- Bushing material: Rubber
- Grade: Standard replacement
- Adjustable: No
- Condition: New
- Country of origin: Turkey
In the box
One control arm with its rubber bushings. The ball joint, mounting hardware and grease fitting are not included, so plan on new fasteners.
Interchange: 102-7875
CA14675 · 51350TP6C00 · 9CB60432 · RK643231 · GS601252 · CMS601252 · X17CA0187
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
102-7875, CA14675, 51350TP6C00, 9CB60432, RK643231, GS601252, CMS601252, X17CA0187
Frequently Asked Questions
Is this Dorman control arm right for the 2010-2011 Honda Accord Crosstour?
Yes. Dorman 522-072 fits the 2010-2011 Honda Accord Crosstour and the 2012-2015 Honda Crosstour, on the front right lower side only.
Does the Dorman OE Solutions suspension control arm come with bushings?
Yes. Dorman 522-072 includes its rubber bushings. The ball joint, mounting hardware and grease fitting are not included, so plan on new fasteners.
What size are the bushings on this front right control arm?
The rubber bushings measure 14.3 mm inside diameter, 39.6 mm outside diameter and 92 mm long. The arm itself is 262.5 mm long.
How can I tell if the bushings on this control arm are worn?
A clunk over bumps, loose steering feel or uneven tire wear can be signs of worn bushings. A shop can inspect them and test the suspension safely.
Is the Dorman 522-072 arm steel, and what is its finish?
Yes. Dorman 522-072 is a steel control arm of casting/forged type with a powder-coated finish.
