Dorman - OE Solutions Suspension Control Arm P/N:522-599
Dorman 522-171 rear lower control arm for the 2011-2013 Kia Sorento and other vehicles holds the rear wheel in position as the suspension moves. This Dorman control arm is a standard-replacement-grade part with its rubber bushings included.
A clunk from the rear over bumps or uneven tire wear can mean a worn arm, with torn bushings or a bent arm as visible signs. A worn rear shock can produce a similar noise, so these signs alone do not prove the arm is at fault. This listing is one arm; the rear axle has one on each side, and they are normally changed as a pair.
It is a direct-fit replacement for the 2011-2013 Kia Sorento, and the vehicles it fits include the 2007-2012 Hyundai Santa Fe and the 2007-2012 Hyundai Veracruz. If your car is not named here, look it up in the "Vehicles it fits" section before you order.
Fit and size
Build and materials
One control arm with its rubber bushings. Mounting hardware, a ball joint and a grease fitting are not included, so plan on new mounting bolts rather than reusing the old ones.
Interchange: TC6115 · CA5038 · 552100W000 · 552102J300 · 5CB90095 · RK641812 · GS90179 · CMS90179 · 2606523
This part cross-references / interchanges with the following part numbers:
Is this the 2011-2013 Kia Sorento control arm for the rear lower position?
Yes. Dorman 522-171 is a rear lower control arm listed for the 2011-2013 Kia Sorento, with a fitment quantity of one.
Can I use this 2007-2012 Hyundai Santa Fe control arm in the rear lower rearward position?
Yes. Dorman 522-171 is listed for the 2007-2012 Hyundai Santa Fe in the rear lower rearward position, one per application.
What are visible signs that a Dorman lower control arm is worn?
Torn or cracked rubber bushings, a bent arm or heavy rust can be seen with the car parked and cool. A clunk from the rear over bumps can also point to it, and a shop can confirm.
Does the Dorman suspension control arm 522-171 come with bushings?
Yes. Dorman 522-171 includes its rubber bushings. Mounting hardware, a ball joint and a grease fitting are not included.
What size are the bushings on the Dorman 522-171?
The bushing has a 14.3 mm inside diameter and a 39.6 mm outside diameter, and it is 92 mm long.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.