Dorman - OE Solutions Suspension Control Arm P/N:524-056
Dorman 524-444 rear lower control arm for the 2002-2008 Jaguar X-Type holds the wheel's position as the suspension moves. This Dorman control arm is a direct replacement, precision-engineered to the design and dimensions of the original components.
A clunk from the rear, uneven tire wear or a wandering feel can mean the arm or its bushings are worn, though a tired wheel bearing or a worn shock mount can be behind those signs too, so find which part is at fault before you buy.
It fits the 2002-2008 Jaguar X-Type, and the car takes one on each side. This listing is a single control arm, and both sides are normally replaced together.
Fit and size
Build and materials
One control arm with its bushings. Mounting hardware, a ball joint and a grease fitting are not included, so plan on new fasteners.
Interchange: TC5494 · CA2305 · 2CB10482 · C2S19669 · C2S20741 · C2S25024 · C2S3602 · C2S36208 · C2S39585 · C2S46370 · C2S50863 · RK642135 · GS101044 · CMS101044 · 2607022 · X21LA7054 · JTC2810
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this the right control arm for the 2002-2008 Jaguar X-Type?
Yes. Dorman 524-444 is listed for the 2002-2008 Jaguar X-Type at the rear left and rear right lower forward positions, one arm per side.
What comes with the Dorman OE Solutions control arm?
Dorman 524-444 comes as one control arm with its rubber bushings. A ball joint, mounting hardware and a grease fitting are not included.
What material is this Dorman lower control arm made of?
The arm is steel with a powder-coated finish, and the bushings are rubber. It is a stamped design with boxed construction.
Can worn bushings on a rear control arm cause uneven tire wear?
Yes, uneven tire wear can be a sign of worn bushings, as can a clunk from the rear. A shop can inspect the arm and its bushings with the car raised.
What size are the bushings on Dorman 524-444?
The bushing has a 14.3 mm inside diameter, a 39.6 mm outside diameter and a 92 mm length. The distance between the mounting holes is 216 mm.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.