Dorman 541-058 front suspension kit for the 2001-2005 Honda Civic and other vehicles replaces worn front-end joints, arms and links. One kit covers the left and right sides of the front end and is engineered for a factory-like feel and performance.
- Application-specific kit with components engineered for the front suspension
- Extended-life components with low-friction polymer bearings and synthetic grease
- Try-on, corrosion and material testing on the parts
- Steel and rubber bushings included with the kit
Quick facts
- Part: Dorman 541-058 suspension kit
- Fits: 2001-2005 Honda Civic and other vehicles
- Position: Front
- Material: Steel and rubber bushings
- Condition: New
Clunks over bumps, loose or wandering steering and uneven front tire wear can mean worn front-end joints. Before you replace them, rule out tire balance, alignment and wheel bearings, which can produce a pull or vibration of their own.
Fits
The kit fits the 2001-2005 Honda Civic and the 2001-2005 Acura EL, and it covers both the left and right sides of the front axle.
Specifications
Fit and size
- Position: Front
- Sides covered: left and right
- Bushing inside diameter: 14.2 mm and 14 mm
- Bushing outside diameter: 48.9 mm and 64.5 mm
Build and materials
- Grade: standard replacement
- Bushing material: steel and rubber
- Bushings: included
- Condition: New
- Country of origin: Thailand
In the box
This listing is one kit covering both sides of the front axle. It holds two upper control arms, two lower ball joints, two inner tie rod ends, two outer tie rod ends and two stabilizer bar links, plus bushings. Shocks, coil springs, strut mount insulators, coil spring insulators and link bolts are not included, so plan on new link bolts rather than reusing the old ones.
Frequently Asked Questions
Is the Dorman 541-058 a 2001 Honda Civic front suspension kit?
Yes. Dorman 541-058 is a front suspension kit for the 2001-2005 Honda Civic, which includes the 2001 model year, and it also fits the 2001-2005 Acura EL.
Which parts come in this Dorman suspension kit?
Dorman 541-058 holds two upper control arms, two lower ball joints, two inner tie rod ends, two outer tie rod ends and two stabilizer bar links, plus bushings. Shocks, coil springs and link bolts are not included.
What are the bushings in this front suspension kit made of?
The bushings are steel and rubber, and they come with the kit. Bushing inside diameters are 14.2 mm and 14 mm, and outside diameters are 48.9 mm and 64.5 mm.
How can I tell the front-end joints in this kit are worn?
Clunking over bumps, loose steering and uneven front tire wear can mean worn joints. A shop can check the joints for play, and steering or suspension wear should be looked at promptly.
Is this front suspension kit tested and made for extended life?
Yes. The parts went through try-on, corrosion and material testing, and the kit uses extended-life components with low-friction polymer bearings and synthetic grease.
Reviews
No reviews yet — be the first to review this product.
Write a ReviewWrite a Review