Dorman - OE Solutions Suspension Kit P/N:541-081
Dorman 541-091 front suspension kit for the 1993-2000 Chevrolet C1500 and other vehicles replaces worn front-end joints on both sides. The kit covers the left and right side suspension components, with one set of joints for each side of the front axle.
Loose or wandering steering, clunks over bumps and uneven tire wear can mean worn ball joints or tie rod ends. These signs alone do not prove the kit is the problem, since a worn shock can cause some of them too.
This kit fits the 1993-2000 Chevrolet C1500, the 1995-2000 Chevrolet Tahoe and the 1993-1999 GMC Yukon, along with other vehicles. On the 1993-2000 Chevrolet C1500, the application-specific design is intended to bring back factory-like feel and performance from the suspension.
Fit and size
Build and materials
Four outer tie rod ends, one pitman arm, one idler arm, two lower ball joints, two upper ball joints, two stabilizer bar link kits, two tie rod adjusting sleeves and one idler arm bracket assembly. Coil springs, shocks and link bolts are not included; plan on new link bolts, since the old ones may not be reusable.
Product information is for general reference and may contain errors. See our Disclaimer.
Is this the right suspension kit for the 1993-2000 Chevrolet C1500?
Yes. Dorman 541-091 is a front suspension kit that fits the 1993-2000 Chevrolet C1500. If your vehicle is not named here, find its year and model in the "Vehicles it fits" section on this page.
Can I use this Tahoe suspension kit on a 1995-2000 Chevrolet Tahoe?
Yes. This front suspension kit fits the 1995-2000 Chevrolet Tahoe, and it is also listed for the 1993-1999 GMC Yukon.
Does the Dorman 541-091 kit come with shocks or coil springs?
No. Dorman 541-091 includes ball joints, tie rod ends, a pitman arm, an idler arm, stabilizer bar link kits and tie rod adjusting sleeves. Shocks, coil springs and link bolts are not included.
What are the bushings in this suspension kit made of?
The bushings are rubber. They measure 9.6 mm inside diameter and 30 mm outside diameter.
What makes this suspension kit extended-life?
This suspension kit uses low-friction polymer bearings and synthetic grease. The part also went through try-on, corrosion and material testing.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.