Dorman 541-093 front suspension kit for the 2002-2003 Chevrolet Trailblazer and other vehicles replaces the worn upper ball joints and control arms on both sides. This Dorman suspension kit is a standard-replacement grade set of extended-life parts.
- Low-friction polymer bearings and synthetic grease for long service life
- Left and right side suspension components in one kit
- Application-specific design for factory-like feel and performance
- Try-on, corrosion and material testing for a quality fit
- Steel and rubber bushings included
Quick facts
- Part: Dorman 541-093 suspension kit
- Fits: the 2002-2003 Chevrolet Trailblazer and other vehicles
- Position: Front
- Material: Steel and rubber bushings
- Condition: New
A clunk over bumps, loose steering or uneven front tire wear can mean the upper ball joints or control arms are worn, though tie rod ends or shocks can be behind the same signs.
Fits
This kit covers the front end of the 2002-2003 Chevrolet Trailblazer, the 2003 Chevrolet SSR and the 2002-2003 Chevrolet Trailblazer EXT, with one kit covering the left and right sides on each. If your car is not one of these, search the "Vehicles it fits" section by year and model.
Specifications
Fit and size
- Position: Front
- Quantity per vehicle: 1 kit
- Bushing inside diameter: 14.2 mm
- Bushing outside diameter: 39.5 mm
Build and materials
- Grade: Standard replacement
- Bushing material: steel and rubber
- Bushings: included
- Condition: New
- Country of origin: China
In the box
Two stabilizer bars, four upper ball joints and two upper control arms. Coil springs, shocks, strut mount insulators and link bolts are not included, so plan on new link bolts, since the old ones may not be reusable.
Frequently Asked Questions
Is this the right Trailblazer suspension kit for a 2002-2003 Chevrolet Trailblazer?
Yes. Dorman 541-093 fits the 2002-2003 Chevrolet Trailblazer and covers both the left and right sides of the front end.
Which parts come in this front suspension kit, and what is left out?
Dorman 541-093 contains 2 stabilizer bars, 4 upper ball joints and 2 upper control arms. Coil springs, shocks, strut mount insulators and link bolts are not included.
What are the bushings in this suspension kit made of?
The bushings are steel and rubber. The kit also uses low-friction polymer bearings with synthetic grease.
What size are the bushings in Dorman 541-093?
The bushings measure 14.2 mm inside diameter and 39.5 mm outside diameter.
What testing has this suspension kit gone through?
This part has undergone try-on, corrosion and material testing for a quality fit and durability.
Reviews
No reviews yet — be the first to review this product.
Write a ReviewWrite a Review