Keep the front stabilizer bar tied firmly to the suspension with the Dorman - OE Solutions Suspension Stabilizer Bar Link Kit 542-498. This steel link connects the front sway bar to the suspension to help limit body roll through corners and support stability and control, and it drops in as a direct-fit replacement for the 2000-2006 Toyota Tundra [All] and 2001-2007 Toyota Sequoia [All].
- Steel construction: coated finish for corrosion resistance.
- Rubber bushings: black, 10 mm inside and 25 mm outside diameter.
- Greaseable design: includes a grease fitting; not pre-greased.
- Threaded ends: End 1 at 10 mm and End 2 male-threaded at 12 mm, 1.5 mm thread pitch; 145 mm overall length; non-adjustable.
Each kit contains one link, two bushings, two washers, and two nuts. It is sold as a one-link kit — the Sequoia uses 2 per vehicle and the Tundra uses 1, so order the quantity your application requires. Clunking or rattling from the front suspension over bumps and during turns, along with loose or vague handling, can be signs a stabilizer bar link may need replacing; diagnose the cause before replacing.
Country of origin: Thailand.
Interchange: 45G20732 · 46G20732A · 101-4982 · 1014982 · 606.44076 · TC2940 · SL10480 · K90680 · SL612 · SL612E · GK90680 · MK90680 · JTS829 · 4882034010 · Manufacturer part number 542-498 (also 542498).
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
What vehicles does the 542-498 stabilizer bar link kit fit?
It's a direct-fit replacement for the 2000-2006 Toyota Tundra [All] and 2001-2007 Toyota Sequoia [All]. See the Buyer's Guide tab to confirm your vehicle.
How many links do I need for my truck?
The kit contains one link. The Sequoia uses 2 per vehicle and the Tundra uses 1, so order the quantity your application requires.
Is this stabilizer bar link greaseable?
Yes. It is a greaseable link with an included grease fitting, but it is not pre-greased.
What's included in the kit?
One stabilizer bar link, two rubber bushings, two washers, and two nuts.
What are signs my stabilizer bar link is worn?
Clunking or rattling from the front suspension over bumps and in turns, plus loose or vague handling, can indicate a worn link. Diagnose the cause before replacing.
Write a Review