Dorman 526-416 rear right trailing arm for the 2015-2017 Hyundai Sonata connects the rear suspension to the body. The arm has gone through testing for proper fit and performance.
- Stamped steel construction with a painted finish for corrosion resistance
- Rubber bushing included, 70 Shore A durometer
- Bracket on the second end, with a bolt-on attachment
- Standard replacement grade, non-adjustable design
Quick facts
- Part: Dorman 526-416 trailing arm
- Also called: suspension trailing arm
- Fits: 2015-2017 Hyundai Sonata
- Position: Rear right
- Material: Steel
- Condition: New
A worn bushing or a damaged arm can show up as a clunk over bumps, uneven rear tire wear or vague handling. Before you replace this arm, rule out worn rear shocks, a loose wheel bearing or tire problems, since those parts can produce comparable noise and wear.
Fits
This is a direct replacement for the 2015-2017 Hyundai Sonata, which takes one on the rear right. The listing is one arm for the rear right; the rear left is a separate part, and the other side of that axle is normally replaced at the same time.
Specifications
Fit and size
- Position: Rear right
- Quantity per vehicle: 1 on this side
- Length: 366 mm
- Mounting hole diameters: 12.5 mm, 13 mm, 13.5 mm
- Attachment: Bolt on, bracket end
Build and materials
- Material: Steel
- Construction: Stamped
- Finish: Painted
- Bushing: Rubber, 70 Shore A
- Grade: Standard replacement, not adjustable
- Country of origin: China
- Condition: New
In the box
One trailing arm with its bushing. Mounting hardware, a ball joint, a grease fitting and a cotter pin are not included, so plan on new bolts.
Interchange: CA10721 · 55280C2110 · RK643608
This part cross-references / interchanges with the following part numbers:
CA10721, 55280C2110, RK643608
Frequently Asked Questions
Is this the right Hyundai Sonata trailing arm for the 2015-2017 model years?
Yes. Dorman 526-416 is the rear right trailing arm for the 2015-2017 Hyundai Sonata. The rear left side is a separate part.
Does this suspension trailing arm come with the bushing and bolts?
The rubber bushing is included. Mounting hardware, a ball joint, a grease fitting and a cotter pin are not, so plan on new bolts.
Is the Dorman 526-416 arm steel, and how long is it?
Yes, Dorman 526-416 is steel with a painted finish. It is 366 mm long, and its mounting holes measure 12.5 mm, 13 mm and 13.5 mm.
How can I tell the bushing on a rear trailing arm is worn?
Cracked or torn bushing rubber, rust or a bent arm are signs of wear that a shop can spot during a rear suspension inspection. A clunk over bumps can also go with a worn bushing.
Does Dorman 526-416 replace part number 55280C2110?
Yes. 55280C2110 is listed as an interchange number for Dorman 526-416, along with CA10721 and RK643608.
