Dorman 600-473 transfer case shift linkage for the 1987-2001 Jeep Cherokee and other vehicles connects the 4WD shifter to the transfer case. It replaces an original linkage that has failed from worn bushings.
- Dorman OE Solutions product line
- Heavy Duty item grade with steel construction
- Steel bushing with a 10 mm bore
- 10 mm rod with a rod end at each end
- Steel bracket with 3 bolt holes
Quick facts
- Part: Dorman 600-473 transfer case shift linkage
- Fits: the 1987-2001 Jeep Cherokee and other vehicles
- Material: Steel
- Condition: New
A loose or sloppy 4WD shifter, trouble moving in or out of 4WD, or play at the bushings and rod ends can mean the linkage is worn. Before replacing it, look it over with the engine off and the vehicle parked, so you know what is actually causing the problem.
Fits
This Dorman transfer case shift linkage is a direct replacement for the 1987-2001 Jeep Cherokee, the 1994-1996 Jeep Grand Cherokee and the 1994-1995 Jeep Wrangler. The 1987-2001 Jeep Cherokee takes one. If your Jeep is not named here, open the "Vehicles it fits" section and look up your exact model and engine.
Specifications
Fit and size
- Quantity per vehicle: 1
- Length: 136 mm
- Rod length: 65 mm
- Rod diameter: 10 mm
- Bushing bore diameter: 10 mm
- Bolt thread diameter: 10 mm
- Bolt length: 25 mm
- Bracket bolt holes: 3
Build and materials
- Material: steel
- Bushing material: steel
- Bracket material: steel
- Item grade: Heavy Duty
- Ends: rod end at both ends
- Condition: new
- Country of origin: India
In the box
Hardware, one threaded rod, two rod ends and two levers.
Frequently Asked Questions
Is Dorman 600-473 a Jeep Wrangler transfer case shift linkage for 1994-1995 models?
Yes. Dorman 600-473 is listed for the 1994-1995 Jeep Wrangler, which takes one.
Is this the Jeep Grand Cherokee transfer case shift linkage for 1994-1996 models?
Yes. Dorman 600-473 is listed for the 1994-1996 Jeep Grand Cherokee. For a different Jeep, open the "Vehicles it fits" section to find your exact model and engine.
Does this transfer case shift linkage come with its rod ends and levers?
Yes. The transfer case shift linkage comes with a threaded rod, two rod ends, two levers and hardware.
What size are the rod and bushing bore on this transfer case shift linkage?
The rod diameter and the bushing bore are both 10 mm, and the rod is 65 mm long. The bolts are 10 mm in thread diameter and 25 mm long.
Is this transfer case shift linkage heavy duty and made of steel?
Yes. Dorman 600-473 is graded Heavy Duty and is steel, with a steel bracket and a steel bushing.
