Dorman - OE Solutions Transmission Control Module P/N:609-007
Dorman 609-018 transmission control module for the 2011 Chevrolet Equinox 4-cylinder 2.4L or V6 3.0L and other vehicles controls shifting in the transmission. This remanufactured Dorman transmission control module (TEHCM) provides the same function and performance as the stock component.
A worn solenoid, damaged wiring or low fluid can be behind harsh shifts, limp mode or a transmission warning light just as a failing module can, so find the cause before buying this one.
This transmission control module for the 2011 Chevy Equinox 4-cylinder 2.4L or V6 3.0L also fits the 2011 Chevrolet Malibu 4-cylinder 2.4L or V6 3.6L and the 2011 Buick LaCrosse 4-cylinder 2.4L or V6 3.6L, with one module needed per vehicle. Driving something else? Look up your year and engine in the "Vehicles it fits" section to see whether this module is listed for it.
Fit and size
Build and materials
One remanufactured transmission control module. Mounting hardware and a wiring harness are not included, so plan on new fasteners, since the old ones may not be reusable.
Interchange: 19331562 · 24256524 · 24256657 · 24258587 · 24260028 · 24261193 · 24261414 · 24264420 · 24275859 · 24287420
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Can I use the Dorman 609-018 as a Chevy Malibu transmission control module on a 2011 Chevrolet Malibu 4-cylinder 2.4L or V6 3.6L?
Yes. Dorman 609-018 is listed for the 2011 Chevrolet Malibu with the 4-cylinder 2.4L or the V6 3.6L, one per vehicle; for a different car, look up its year and engine in the "Vehicles it fits" section.
Is this a Buick LaCrosse transmission control module for the 2011 LaCrosse with the 4-cylinder 2.4L or V6 3.6L?
Yes. Dorman 609-018 is listed for the 2011 Buick LaCrosse with either the 4-cylinder 2.4L or the V6 3.6L.
Does the Dorman 609-018 come with a wiring harness or mounting hardware?
No. This listing is one remanufactured transmission control module with new gaskets, grommets and seals; a wiring harness and mounting hardware are not included.
Does this transmission control module need programming after it is installed?
Yes. The module must be programmed with original manufacturer software afterward, for example through a Remote Assist Programming (RAP) Kit.
What is the upgraded plastic in the Dorman 609-018?
The Dorman 609-018 uses upgraded PEEK plastic, which resists heat and debris and extends the life of the module.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.