Dorman - OE Solutions Turbocharger Coolant Line P/N:667-538
Dorman 667-565 left turbocharger coolant line for the 2018-2019 Mercedes-Benz GLE500 V8 4.7L and other vehicles carries coolant returning from the turbocharger. This Dorman turbocharger coolant line is intended to replace a leaking or failed original return line.
A coolant puddle under the vehicle, a falling coolant level or damp, stained fittings can mean this line is leaking. A loose clamp, a weeping turbocharger fitting or a worn radiator hose can leave similar marks, so pin down the source before you buy. Check the level only with the engine cool.
It is listed for a wide range of Mercedes-Benz models, led by the 2018-2019 Mercedes-Benz GLE500 V8 4.7L, the 2019 Mercedes-Benz GLS500 V8 4.7L and the 2017-2019 Mercedes-Benz GLS550 V8 4.7L, and each takes one on the left side. The right side is a separate part, ordered on its own. If your Mercedes-Benz is not named here, find your year and engine in the "Vehicles it fits" section.
Fit and size
Build and materials
One turbocharger coolant line.
Interchange: 62315064170285036 · 2782000000 · 2782001000 · 2782002551 · CHU0719
This part cross-references / interchanges with the following part numbers:
Is the Dorman 667-565 turbocharger coolant line right for the 2018-2019 Mercedes-Benz GLE500 V8 4.7L?
Yes. Dorman 667-565 is a left-side line listed for the 2018-2019 Mercedes-Benz GLE500 V8 4.7L, and that side takes one. For other models, use the "Vehicles it fits" section.
Does the 667-565 turbocharger coolant line come with anything else in the package?
No. Dorman 667-565 is supplied as a single coolant line with steel male fittings at both ends, and nothing else is in the package.
How long is the Dorman 667-565 coolant line, and what are its diameters?
This line is 9.12 inches long, or 10 inches along the centerline. It has a 0.3 inch inside diameter and a 10 mm outside diameter.
How can I tell if a turbocharger coolant line is leaking?
With the engine off and cool, look for damp or stained spots on the line and its fittings, or coolant on the surfaces below. A falling coolant level can also point to a leak, and a shop can pressure-test the system.
What is this left turbocharger coolant line made of?
It is a molded assembly of steel, rubber and plastic, with steel fittings. It is made in China.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.