Dynamic Friction 355-58003 brake master cylinder for the 1990-1997 Acura Integra turns pedal force into hydraulic pressure for the brakes. It is the start of the car's hydraulic brake circuit.
A brake pedal that feels soft or slowly sinks, or fluid showing around the cylinder, can mean the master cylinder is wearing out, though worn lines or calipers can cause a soft pedal too. Before replacing it, look at the fluid level and for wet spots around the cylinder and brake lines with the engine off. Leave pedal and pressure tests to a shop.
This master cylinder is a direct-fit replacement for the 1990-1997 Acura Integra, which takes one per car.
One brake master cylinder with its reservoir.
Will this master cylinder fit the 1990-1997 Acura Integra?
Yes. Dynamic Friction 355-58003 is listed for the 1990-1997 Acura Integra, and each car takes one. The years are all you need to match.
Does this Dynamic Friction brake master cylinder come with the reservoir?
Yes. The reservoir is included with the 355-58003 master cylinder, so you receive one brake master cylinder with its reservoir.
What bore size does this brake master cylinder have?
The Dynamic Friction 355-58003 has a 15/16 inch bore. Bore size is one of the specs to match when choosing a master cylinder.
Can a soft brake pedal mean the master cylinder is worn?
It can, but worn lines or calipers can also cause a soft pedal. Fluid around the cylinder is another sign, and a shop can test the system.
Can I keep driving with a leaking brake master cylinder?
No. Have the brakes checked and the master cylinder replaced promptly, because a leak can reduce your braking ability.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
