Dynamic Friction 604-54249 front brake rotor for the 2000-2003 Ford F-650 and other vehicles gives the brake pads a surface to clamp against and slow the wheel. This disc brake rotor is vented and fully coated with GEOSPEC on the disc and hat.
A worn or scored front rotor can show up as a pulsing brake pedal, vibration under braking or visible grooves. Before you replace the rotor, rule out sticking calipers, worn pads and loose hardware as the source of those signs. A rotor worn to the 36.06 mm discard thickness is due for replacement.
It fits the 2000-2003 Ford F-650 and the 2000-2003 Ford F-750, and is designed for the same form, fit and function as OEM brake rotors. This listing is one rotor; the 2000-2003 Ford F-650 takes two, so order two and fit them together.
Fit and size
Build and materials
Does the Dynamic Friction brake rotor fit the 2000-2003 Ford F-750?
Yes. Dynamic Friction 604-54249 is a front brake rotor for the 2000-2003 Ford F-750, and it also fits the 2000-2003 Ford F-650.
What size is this front brake rotor?
Dynamic Friction 604-54249 is 390 mm across and 87 mm tall, with a 39 mm nominal thickness and a 36.06 mm discard thickness. The bolt circle is 184.2 mm with 10 lug holes.
Is this brake rotor vented or solid?
It is vented, with an original equipment vane configuration for heat dissipation. The surface is smooth and non-directional, so it has no set rotation direction.
What is the GEOSPEC coating on this rotor?
GEOSPEC fully coats both the disc and the hat of this rotor and provides corrosion protection over zinc or conventional painting.
Do I need to degrease this rotor before installing it?
No. This rotor is ready to install and needs no pre-degreasing preparation.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
