Dynamic Friction 624-31153D front right brake rotor for the 2015-2019 BMW X6 and other vehicles gives the brake pads a drilled, vented surface to grip. It is a DFC GEOSPEC coated brake rotor.
Pedal pulsation, grooves in the disc face or noise when braking can mean the disc brake rotor is worn. Worn pads, a sticking caliper or a failing wheel bearing can produce some of the same noises or pulling, so find out what is behind them before you buy.
These brake rotors for the 2015-2019 BMW X6 and the 2015-2018 BMW X5 are designed to meet the same form, fit and function as OEM brake rotors. This listing is one brake rotor for the front right: the 2015-2018 BMW X5 takes one on that side, the front left is a separate part ordered on its own, and both sides are normally replaced together.
Fit and size
Build and materials
Will this front right brake rotor fit as one of the brake rotors for the 2015-2018 BMW X5?
Yes. Dynamic Friction 624-31153D is the front right brake rotor for the 2015-2018 BMW X5. The front left side is a separate part.
Is this Dynamic Friction brake rotor vented or solid?
It is vented. Dynamic Friction 624-31153D has an X-drilled surface and a 395 mm outside diameter.
At what thickness should this front right brake rotor be replaced?
Its discard thickness is 34.4 mm, so replace it once it wears to that thickness or below. It can be measured as part of a brake service.
Does this drilled brake rotor need degreasing before installation?
No. This brake rotor is ready to install, so no pre-degreasing preparation is needed.
What coating is on this front right brake rotor?
The disc and hat are fully coated with GEOSPEC, and the brake rotor has a rust-resistant coating.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
