Dayco 71692 coolant bypass hose for the 2005-2009 Chevrolet Equinox and other vehicles carries engine coolant along the cooling system's bypass path. It replaces an inlet hose that has aged or started to seep.
- EPDM hose material
- Built to SAE J20R4 Class D-1 and SAE J1684 Type EC
- Single I.D. hose with a 4 in trunk height
Quick facts
- Part: Dayco 71692 coolant bypass hose
- Also called: engine coolant bypass hose
- Fits: 2005-2009 Chevrolet Equinox and other vehicles
- Position: Inlet
- Material: EPDM
- Condition: New
A worn bypass hose can show up as coolant drips, a cracked or swollen section or a falling coolant level. Before you replace the hose, rule out a loose clamp or a fault elsewhere in the cooling system, since another leak can show up the same way.
Fits
The vehicles it fits include the 2005-2009 Chevrolet Equinox, the 1997-2006 Chevrolet Malibu and the 2000-2005 Chevrolet Impala V6 3.4L, along with many Buick, Pontiac, Oldsmobile and Isuzu models. Open the "Vehicles it fits" section to check your exact model and engine.
Specifications
Fit and size
- Position: Inlet
- Quantity per vehicle: 1
- Trunk height: 4 in
Build and materials
- Hose type: Single I.D. hose
- Material: EPDM
- SAE specification: SAE J20R4 Class D-1, SAE J1684 Type EC
- Condition: New
In the box
One coolant bypass hose; the vehicle takes one. A protective sleeve and a heat shield are not included.
Interchange: 14156S · 19026 · 63121 · 4392 · 18434 · 11026
This part cross-references / interchanges with the following part numbers:
14156S, 19026, 63121, 4392, 18434, 11026, 10182356, 12600100, 8970881390, 8-97088-139-0
Frequently Asked Questions
Will the Dayco 71692 fit a 2005-2009 Chevrolet Equinox?
Yes. Dayco 71692 is listed for the 2005-2009 Chevrolet Equinox, one hose per vehicle. For any other model, open the "Vehicles it fits" section and check your exact engine.
Is this engine coolant bypass hose the right one for the 1997-2006 Chevrolet Malibu?
Yes. It is listed for the 1997-2006 Chevrolet Malibu, including the V6-3.1L in 1997-1999 and the V6-3.5L in 2004-2006.
What material and SAE ratings does the Dayco 71692 hose have?
The hose is EPDM and is listed to SAE J20R4 Class D-1 and SAE J1684 Type EC.
Does the Dayco 71692 come with a protective sleeve or heat shield?
No. Dayco 71692 is one coolant bypass hose, with no protective sleeve or heat shield included.
What are the signs this inlet coolant bypass hose is wearing out?
A crack, a swollen or soft feel, or wet coolant at the ends can mean the hose is wearing out. Look only with the engine off and cool; a shop can pressure-test the cooling system.
