Anchor Engine Mount P/N:9825
Anchor 9923 front engine mount for the 2007-2010 Audi Q7 V6 3.6L or V8 4.2L, the 2008-2016 Q7 V6 3.0L and other vehicles supports the engine and dampens vibration. Anchor engine mounts are engineered and designed to OE standards.
Cracked or separated rubber, a clunk when accelerating, decelerating or shifting, or vibration at idle can mean a mount is worn. Before you replace anything, find the actual cause: with the engine off and cool, look over the rubber for cracks, splits or fluid seepage.
It is an Audi Q7 engine mount for the 2007-2010 Q7 V6 3.6L or V8 4.2L and the 2008-2016 Q7 V6 3.0L, and a Porsche Cayenne engine mount for the 2004-2006 Cayenne V6 3.2L and the 2008-2014 Cayenne V6 3.6L. It also fits the 2004-2007 Volkswagen Touareg V6 3.2L, the 2004-2008 Touareg V10 4.9L, the 2004-2009 Touareg V8 4.2L, the 2007-2017 Touareg V6 3.6L, the 2009-2018 Touareg V6 3.0L and the 2011-2017 Touareg V8 4.2L.
Fit and size
Build and materials
One engine mount. These vehicles take two, so order two and fit them together. Mounting hardware, a mounting bracket and a heat shield are not included, so plan on new bolts, as the old ones may not be reusable.
Interchange: 7L8199131A · A6987 · 7L6199131A · B6987 · AVE0332P · 4350H · 3707H · 7P6199131D · EM7338
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Will this Anchor engine mount fit the 2008-2016 Audi Q7 V6 3.0L?
Yes. Anchor 9923 fits the 2008-2016 Audi Q7 V6 3.0L, covering both the front left and front right positions.
Is this Anchor motor mount a hydraulic type?
Yes. Anchor 9923 is a hydraulic engine mount, intended for high vibration and torque applications and for damping excess noise and vibration.
Do bolts come with this front engine mount?
No. This listing is one mount only. Mounting hardware, a mounting bracket and a heat shield are not included, so plan on new bolts.
What stud thread does this front engine mount use?
Anchor 9923 has one stud with an M12-1.5 metric thread and two mounting holes, each 10.6 mm (0.42 in) in diameter.
Could a clunk when shifting come from a worn hydraulic engine mount?
It can. A clunk on acceleration or shifting, vibration at idle, or cracked, separated or fluid-seeping rubber can mean a worn mount.
Manufacturer's Warranty: 12 Month Warranty.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.