Seal the throttle body-to-intake connection and keep unmetered air out with the FEL-PRO Fuel Injection Throttle Body Mounting Gasket 61648. It drops in as a direct-fit replacement for the 2005-2019 Nissan Frontier (L4-2.5L) and the 2009-2012 Suzuki Equator (L4-2.5L), restoring a tight joint where the throttle body meets the intake.
This rubber gasket measures 0.228 in (5.8 mm) thick and is built to OE-level standards for the real-world repair environment.
A worn or hardened throttle body gasket can let unmetered air past the joint, and if a vacuum leak here is the cause of a rough idle or lean condition, replacing this gasket addresses it. Sealing surfaces should be clean before installation.
Interchange: 16175EA000 · G31940 · 1342182Z00 · 711662700
This part cross-references / interchanges with the following part numbers:
What vehicles does gasket 61648 fit?
It fits the 2005-2019 Nissan Frontier (L4-2.5L) and the 2009-2012 Suzuki Equator (L4-2.5L). Check the Buyer's Guide tab to confirm your exact application.
What does a throttle body mounting gasket do?
It seals the joint between the throttle body and the intake manifold, keeping unmetered air from leaking into the intake so the engine draws only the air it meters.
What is this gasket made of?
The FEL-PRO 61648 is a rubber gasket, and it measures about 0.228 in (5.8 mm) thick.
What are signs this gasket may need replacing?
A cracked or hardened gasket can create a vacuum leak at the throttle body joint, which may show up as a rough idle or a lean condition. Diagnose the cause before replacing.
What numbers does this gasket interchange with?
It cross-references 16175EA000, G31940, 1342182Z00, and 711662700. Match the number or your vehicle's fitment to be sure it's correct.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
