Dorman Bolt P/N:960-210D
Dorman 980-210D bolt is one of the Dorman flange bolts, with a hex head and a built-in flange that clamps a part in place. It can be used in a variety of applications, from auto to home.
A bolt with a stripped thread, a rounded hex head or rust damage needs replacing. A loose or rattling part alone does not prove the bolt is the problem, since a worn threaded hole is another common cause.
This is universal hardware, chosen by size rather than by vehicle. Match the thread size, pitch and length to the bolt being replaced.
Fit and size
Build and materials
Four bolts.
Interchange: 5034
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
How do I match the Dorman 980-210D to the bolt I'm replacing?
The Dorman 980-210D is an M6-1 x 10 mm flanged bolt with a 1 mm thread pitch. Match the thread size, pitch and length to your old bolt.
How many flange bolts come in the Dorman 980-210D pack?
The Dorman 980-210D pack contains four steel bolts.
Is this Dorman bolt a hex drive, and what tool size does it take?
Yes, this bolt has a hex drive head with a 0.4 in head tool size.
How is the yellow zinc finish on this bolt tested for corrosion?
The hardware undergoes salt spray testing to confirm its corrosion resistance. The bolt is steel with a yellow zinc finish and is Class 10.9.
Does the Dorman 980-210D replace part number 5034?
Yes, 5034 is listed as an interchange number for the Dorman 980-210D. Still compare the size, thread pitch and length with your old bolt.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.