Focus Auto Parts 341529 rear shock absorber for the 2004-2020 Toyota Sienna damps spring movement at the rear axle to help control body motion over bumps.
A worn rear shock absorber can show up as a bouncy ride, body sway, fluid on its body or a clunk over bumps. Before you replace the suspension shock absorber, rule out worn springs, bushings and mounts at the same axle, since they can produce a similar bounce or noise.
It fits the 2004-2010 and 2014-2020 Toyota Sienna, plus the 2011-2013 Sienna V6-3.5L. A 2004-2020 Toyota Sienna takes two of these at the rear axle, and the pair is normally replaced at the same time.
Does this Focus Auto Parts shock absorber fit the 2004-2020 Toyota Sienna?
Yes. Focus Auto Parts 341529 is a rear shock absorber listed for the 2004-2020 Toyota Sienna.
Does the 2011-2013 Toyota Sienna V6-3.5L take the same rear shock absorber?
Yes. Focus Auto Parts 341529 is listed for the 2011-2013 Toyota Sienna V6-3.5L, and for the 2004-2010 and 2014-2020 Sienna with any engine.
Is 341529 a front or rear shock absorber?
It is a rear shock absorber, so it goes at the rear axle and not on the front suspension.
Could a bouncy ride or a clunk over bumps mean a rear shock absorber is worn?
Yes, they can. Fluid on the shock body, body sway and a bouncy ride are other signs of a worn shock that you can see or notice in normal driving.
Can I keep driving with a leaking rear shock absorber?
Have it inspected and replaced promptly. Fluid on the body of a shock absorber can mean it is worn, and a shop can check the rest of the rear suspension at the same visit.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.