Raybestos Brakes Disc Brake Caliper P/N:FRC11879N
Put a remanufactured, 100% pressure-tested brake caliper on the front left wheel with the Raybestos R-Line Semi-Loaded Caliper FRC11221. It is a floating caliper that clamps the pads against the rotor each time you press the brake pedal. It is a direct-fit replacement for many vehicles, among them the 2001-2007 Dodge Grand Caravan, 2001-2007 Dodge Caravan and 2001-2003 Chrysler Voyager. See the Buyer's Guide tab for the full list.
Raybestos R-Line non-plated calipers are remanufactured OE units. All rubber and sealing components, including seals, boots and bleeders, are new. Castings, guide pins and brackets are carefully inspected before they are reused.
Specifications: Floating caliper with a cast iron casting, a 2.594 in (65.9 mm) piston diameter, a 3/8-24 bleeder screw thread, and 14 mm bracket mounting holes with a 2.0 mm thread pitch. Country of origin: Mexico.
This caliper is sold individually for the front left position, and the listed applications use one. Replacing both front calipers together is recommended for balanced braking. Follow the vehicle service information during installation and bleed the brake system afterward.
Interchange: 18-B4776 · 40-87042 · 99-17682A · 16-4776 · 18-4776 · 18-P4776 · 141.63026 · 142.63026 · 10-1182S · 14-1182 · 14-1184 · 11-22129-1 · 11-22149-1
L55958PM · SL55958 · SL2098 · 5019806AA · SC0287 · C4776 · C668 · SLC668 · 6504 · S41237 · TQM25427 · 18B4776 · 4087042 · 9917682A · 164776 · 184776 · 18P4776 · 14163026 · 14263026 · 101182S · 141182 · 141184 · 11221291 · 11221491
This part cross-references / interchanges with the following part numbers:
Is this the right caliper for a Dodge Caravan?
It is listed as the front left caliper for the 2001-2007 Dodge Caravan, so it works as a 2005 Dodge Caravan caliper replacement. It is also listed for the 2001-2007 Dodge Grand Caravan.
What does a disc brake caliper do?
It holds the brake pads. When you press the pedal, hydraulic pressure pushes its piston so the pads clamp the rotor to slow the wheel. This floating unit mounts at the front left.
What is included with this semi-loaded caliper?
It is a remanufactured caliper with new seals, boots, bleeder screws, abutment hardware, banjo bolts and O-rings. Its castings, guide pins and brackets are inspected before reuse.
What are the caliper's key specifications?
It has a floating design and a cast iron casting, with a 2.594 in (65.9 mm) piston and a 3/8-24 bleeder screw thread. The bracket mounting holes are 14 mm with a 2.0 mm thread pitch.
What signs suggest a brake caliper may need replacing?
Signs include brake fluid leaking at the caliper, pulling to one side when braking, a dragging brake or uneven pad wear. Diagnose the cause before replacing the caliper.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.