Restore firm, hydraulic clamping to the rear left corner with the Raybestos R-Line Semi-Loaded Disc Brake Caliper & Bracket Assembly (FRC11626). A caliper houses the piston that presses the brake pads against the rotor under hydraulic pressure, and this remanufactured assembly drops in as a direct-fit replacement for the 2002-2010 Dodge Ram 1500, 2003 Dodge Ram 1500/2500/3500 Van, 2004-2009 Dodge Durango, 2007-2009 Chrysler Aspen, 2011-2018 Ram 1500, and 2019-2023 Ram 1500 Classic (all engines).
New rubber & sealing parts: seals, boots, bleeder screws, abutment hardware, banjo bolts, and O-rings are replaced with new for leak-free operation.
EPDM70 rubber components: chosen for heat resistance, performance, and durability; silicone boots are fitted for heavy-duty applications where applicable.
100% pressure tested: every unit is pressure tested, with castings, guide pins, and brackets inspected before reuse.
Floating cast-iron caliper: 2.122 in (53.9 mm) piston with an M10x1 bleeder screw; materials match OE specifications.
If a leaking, sticking, or seized caliper is the cause of your uneven pad wear or a dragging brake, this assembly replaces it. Country of origin: Mexico.
It is the hydraulic clamp for one wheel—its piston presses the brake pads against the rotor to slow the vehicle. This semi-loaded unit ships with its mounting bracket and new seals, boots, and hardware.
Which vehicles does this caliper fit?
Applications include the 2002-2010 Dodge Ram 1500, 2003 Ram Van (1500/2500/3500), 2004-2009 Durango, 2007-2009 Chrysler Aspen, 2011-2018 Ram 1500, and 2019-2023 Ram 1500 Classic. See the Buyer's Guide tab.
What position does this caliper install in?
It is cataloged as the rear left disc brake caliper. Calipers are position-specific, so confirm this corner matches the one you're replacing.
Is this a new or remanufactured caliper?
It is a remanufactured R-Line unit built from an OE core, with new seals, boots, bleeder screws, abutment hardware, banjo bolts, and O-rings. Castings, guide pins, and brackets are inspected and reused.
What are signs my brake caliper may need replacing?
Signs a caliper may need replacing include brake fluid leaking at the caliper, a sticking or seized piston, uneven pad wear, or a brake that drags. Diagnose the cause before replacing.
Clamp your rear brake pads against the rotor with the Raybestos R-Line Remanufactured Semi-Loaded Disc Brake Caliper and Bracket Assembly (FRC11625) — a floating caliper rebuilt from an original OE...
Clamp the brake pads against the rotor with steady hydraulic force using the Raybestos R-Line Remanufactured Semi-Loaded Disc Brake Caliper & Bracket Assembly, MPN FRC11585. It's cataloged for the...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
