Restore reliable, leak-free front-left braking on your Subaru with the Raybestos Brakes R-Line Remanufactured Semi-Loaded Disc Brake Caliper and Bracket Assembly (MPN FRC11608). This is a floating, cast-iron caliper cataloged for the FRONT LEFT position, remanufactured from an OE core with all-new rubber and sealing components and shipped as a semi-loaded assembly with its bracket. It drops in as a direct-fit replacement for the listed applications, including the 2005-2006 SAAB 9-2X [All]; 2003-2006 Subaru Baja [All]; 2016-2017 Subaru Crosstrek [All]; 2003-2018 Subaru Forester [All] and 2014-2018 Subaru Forester [H4-2.5L]; 2003-2005 and 2008-2014 Subaru Impreza [All]; 2002-2015 Subaru Legacy [All] and 2013-2015 Subaru Legacy [H4-2.5L]; 2002-2014 Subaru Outback [All] and 2010-2014 Subaru Outback [H4-2.5L]; 2012-2014 Subaru WRX [All]; and 2014-2015 Subaru XV Crosstrek [All]. See the Buyer's Guide tab for the full list.
Remanufactured OE: Non-plated caliper rebuilt with new rubber and sealing parts; castings, guide pins, and brackets are inspected before reuse, then each unit is tested for braking performance.
New leak-critical parts: Seals, boots, bleeder screws, abutment hardware, banjo bolts, and O-rings are all replaced with new materials.
EPDM70 rubber & silicone boots: EPDM70 rubber components are used for heat resistance and durability, with silicone boots on heavy-duty applications where applicable.
Pressure tested: 100% pressure tested; materials match OE specifications.
Specs: floating caliper with a 1.681 in (42.7 mm) piston, M10x1 bleeder screw thread, and a 12.000 mm bracket mounting hole with 1.250 mm thread pitch. Country of origin: Mexico.
It is a semi-loaded assembly that includes the remanufactured floating caliper and its mounting bracket, with new seals, boots, bleeder screws, abutment hardware, banjo bolts, and O-rings installed.
Which position does FRC11608 fit?
It is cataloged for the FRONT LEFT (driver's-side front) position. For even braking, it's good practice to service both front calipers together, though each is sold individually.
Is this a new or remanufactured caliper?
It is a remanufactured OE caliper. The casting, guide pins, and bracket are inspected and reused, while the rubber and sealing components are replaced with new parts and the unit is 100% pressure tested.
What is the piston size and bleeder thread?
The caliper uses a 1.681 in (42.7 mm) piston and an M10x1 bleeder screw thread. The bracket mounting hole is 12.000 mm with a 1.250 mm thread pitch.
Will this fit my Subaru?
It's a direct-fit replacement for the listed applications, such as the Subaru Forester, Legacy, Outback, Impreza, WRX, Baja, Crosstrek/XV Crosstrek, and SAAB 9-2X. Check the Buyer's Guide tab to confirm your exact year and engine.
Bring firm, even clamping back to your front-left brake corner with the Raybestos Element3 New Semi-Loaded Disc Brake Caliper and Bracket Assembly (FRC12213N). This floating-type caliper squeezes the...
Clamp the brake pads against the rotor under hydraulic pressure with the Raybestos Brakes Element3 New Semi-Loaded Disc Brake Caliper & Bracket Assembly, MPN FRC11617N. This front-left floating...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
