Raybestos Brakes Disc Brake Caliper P/N:FRC12464
Get the rear-right corner clamping and holding again with the Raybestos R-Line Remanufactured Semi-Loaded Disc Brake Caliper and Bracket Assembly (FRC11621). It's a direct-fit replacement for the rear right position on the 2004-2012 Chevrolet Malibu, 2004-2007 Saturn Ion, 2005-2008 Chevrolet Cobalt, 2005-2010 Pontiac G6, 2006 Pontiac Pursuit, 2007-2010 Pontiac G5, 2007-2009 Saturn Aura and 2008-2010 Chevrolet HHR (all engines). If a seized, sticking, or leaking rear caliper is the cause of your uneven braking or dragging brake, this remanufactured unit replaces it.
Remanufactured from OE castings: castings, guide pins, and brackets are carefully inspected before reuse, and each unit is rebuilt with all-new rubber and sealing components.
New leak-prevention parts: seals, boots, bleeder screws, abutment hardware, banjo bolts, and O-rings are replaced with new materials for leak-free operation.
EPDM70 rubber components for heat resistance, performance, and durability; silicone boots on heavy-duty applications where applicable.
100% pressure tested; non-plated, cast-aluminum caliper with an integral parking brake. Piston diameter 1.496 in (38 mm), M10x1 bleeder screw thread, and a 12.000 mm bracket mounting hole with 1.750 mm thread pitch. Materials match OE specifications. Country of origin: Mexico. Sold individually.
Interchange: 15-14271 · 1514271 · 99-17345A · 9917345A · 18-B4892 · 18B4892 · 18-P4892 · 18P4892 · 141.62579 · 14162579 · 142.62579 · 14262579 · SC0983 · SC1066 · 11-4271 · 114271 · 14-4271 · 144271 · 10-09528-1 · 10095281 · 11-21180-1 · 11211801 · Manufacturer part number FRC11621.
This part cross-references / interchanges with the following part numbers:
Which position does FRC11621 fit?
It's the rear right disc brake caliper and bracket assembly for the listed applications.
Is a bracket included?
Yes—this is a semi-loaded caliper and bracket assembly, rebuilt with new seals, boots, bleeder screws, abutment hardware, banjo bolts, and O-rings.
What is the caliper piston diameter?
The piston measures 1.496 in (38 mm), and the bleeder screw thread is M10x1.
Does it work with the parking brake?
Yes, it's an integral parking brake caliper, so the parking-brake mechanism is built into the rear caliper.
Do I need to replace both rear calipers?
It's sold individually, but replacing the rear pair together is recommended for even, balanced braking.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.