Raybestos Brakes Disc Brake Caliper P/N:FRC11879N
Raybestos Brakes FRC11412 rear right brake caliper for the 2007-2010 Chevrolet Silverado 3500 HD and other vehicles clamps the brake pads against the rotor to slow the wheel. This remanufactured disc brake caliper and bracket assembly is semi-loaded, and its materials match OE specifications and vehicle-specific designs.
A worn or failing caliper can show up as brake fluid around the caliper or its boot, the truck pulling to one side under braking, or one rear pad wearing faster than the other. With the engine off and the brakes cool, you can look for fluid seepage at the next brake service. Pulling or drag can also come from other brake parts, so find the cause before replacing the caliper. This listing is one caliper for the rear right; the rear left is a separate part, and both sides are normally replaced together.
The 2007-2010 Chevrolet Silverado 3500 HD, the 2007-2010 GMC Sierra 3500 HD and the 2001-2007 Chevrolet Silverado 3500 are among the vehicles this rear right caliper fits.
Fit and size
Build and materials
One remanufactured brake caliper with its mounting bracket; the rear right position takes one.
Interchange: 99-17317B · 18-B4815 · 141.66509 · 142.66509 · 14-4045
SC1014 · 18044317 · 18046143 · 25848330
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this Raybestos Brakes FRC11412 caliper right for the 2007-2010 Chevrolet Silverado 3500 HD?
Yes, Raybestos Brakes FRC11412 is a rear right caliper that fits the 2007-2010 Chevrolet Silverado 3500 HD and the 2007-2010 GMC Sierra 3500 HD. For other trucks, look up your year and model in the "Vehicles it fits" section.
Does the Raybestos Brakes FRC11412 rear right caliper come with its mounting bracket?
Yes. Raybestos Brakes FRC11412 is a semi-loaded caliper and bracket assembly. The listing holds one caliper for the rear right, and that position takes one.
What piston size and bleeder thread does this rear right caliper have?
The piston diameter is 59.943 mm (2.36 in), and the caliper has two pistons. The bleeder screw thread is M10X1.50.
How can I tell if a rear brake caliper is leaking or sticking?
Signs can include brake fluid around the caliper or its boot, the truck pulling to one side while braking, or one rear pad wearing faster than the other. A shop can test the brake hydraulics.
What is replaced when Raybestos R-Line remanufactures a caliper?
New seals, boots, bleeder screws, abutment hardware, banjo bolts and O-rings go in, while the castings, guide pins and brackets are inspected and reused. Every caliper is 100% pressure tested.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.