Fuel Pump Module for 2009-2014 Ford F-150 - Carter P76468M

Be the first to review this product
$203.99
WARNING:California Proposition 65▾
MPN: P76468M
Item Package Quantity: 1
Adding to cart… The item has been added

Have questions?

Carter Fuel Pump Module Assembly P/N:P76468M
Carter Fuel Pump Module Assembly P/N:P76468M
$203.99

Carter P76468M fuel pump module for the 2009-2010 Ford F-150 V8 4.6L or 5.4L and the 2011-2014 F-150 V6 3.7L, V8 5.0L or 6.2L sends fuel from the tank to the engine. This in-tank module also carries the fuel sending unit.

  • Made with all new materials under quality-controlled manufacturing and testing procedures
  • Fuel sensor design resists corrosive fuel blends and additives
  • Housing made of POM
  • Internal strainer on the pump module
  • Nitrile rubber gasket or seal included

Quick facts

  • Part: Carter P76468M fuel pump module
  • Also called: fuel pump assembly
  • Fits: 2009-2010 Ford F-150 V8 4.6L or 5.4L and the 2011-2014 F-150 V6 3.7L, V8 5.0L or 6.2L
  • Material: POM housing
  • Condition: New

A fuel gauge that reads wrong, hard starting, or an engine that stumbles or stalls can point to a worn pump module. These signs alone do not prove the module is at fault; a blown fuel pump fuse is one other common cause.

Fits

This fuel pump module is a direct-fit replacement for the 2009-2010 Ford F-150 V8 4.6L or 5.4L and the 2011-2014 F-150 V6 3.7L, V8 5.0L or 6.2L. The listing is one module, and the truck takes one, installed in its fuel tank.

Specifications

Fit and size

  • Quantity per vehicle: 1
  • Mounting: in tank
  • Inlet type: port
  • Inlet fitting thread size: 3/8 - 16
  • Outlet outside diameter: 0.37 in
  • Outlet quantity: 1
  • Connector: 1, rectangle, female, white
  • Resistance, full: 9.49 ohms

Build and materials

  • Fuel type: gas
  • Grade: standard replacement
  • Housing material: POM
  • Strainer: internal
  • Gasket or seal material: nitrile rubber
  • Condition: new
  • Country of origin: Mexico

In the box

One fuel pump module with its fuel sending unit and a gasket or seal. Mounting hardware and an anti-rattle spring are not included, so plan on new mounting hardware rather than reusing the old.

Interchange: 9L3Z 9H307-F
2920720 · E2545M · 1234674 · M2520830 · FG1316 · PFS490 · C0135M · A30440 · SP2096M · TU295 · B12111779TG

This part cross-references / interchanges with the following part numbers:

2920720, E2545M, 1234674, M2520830, FG1316, 9L3Z 9H307-F, PFS490, C0135M, A30440, SP2096M, TU295, B12111779TG

Frequently Asked Questions

Is the Carter P76468M fuel pump module right for the 2011-2014 Ford F-150 V8 5.0L?

Yes. Carter P76468M fits the 2011-2014 F-150 V6 3.7L, V8 5.0L or 6.2L, and also the 2009-2010 F-150 V8 4.6L or 5.4L.

Does this fuel pump module come with the sending unit and a seal?

Yes. The module includes the fuel sending unit and a gasket or seal. Mounting hardware and an anti-rattle spring are not included.

What size is the inlet fitting thread on the Carter P76468M?

Carter P76468M has a 3/8 - 16 inlet fitting thread and a port-type inlet. The outlet outside diameter is 0.37 inch.

Can a wrong fuel gauge reading mean the fuel pump assembly needs replacing?

It can, since the module carries the fuel sending unit, but wiring or gauge faults can also give a wrong reading. A shop can test the sender and pump safely.

Does Carter P76468M replace number 9L3Z 9H307-F?

Yes. Carter P76468M replaces 9L3Z 9H307-F, along with the other numbers on the Interchange line.