Gates TR28492 belt drive components for the 1996-1999 International 9800 SBA 14.0L and other vehicles come as one notched V-belt that carries engine power to accessories such as the alternator, air conditioning and fan.
- Green Stripe Truck and Bus Series V-belt, made for heavy-duty truck, bus and off-road equipment
- Absorbs normal shock loads without damage to the belt
- Molded notches reduce bending stress, especially on small diameter pulleys, and dissipate heat
- High modulus, high strength tensile cord
- Oil and heat-resistant construction throughout
- Meets SAE J636b, SAE J637, RMA oil and heat resistant standards and static conductivity requirements
With the engine off and cool, run your eye along the belt for cracks, fraying, glazed sides or oil. A squeal or a slipping accessory can point to a worn belt, but a loose pulley or a failing accessory can look the same, so find the cause before you replace it.
It also fits the 1985-1999 Kenworth K100E 14.0L and the 1982-1990 Kenworth W900 14.0L, along with many other trucks, buses and equipment. Open the "Vehicles it fits" section and look up your exact model and engine to see whether yours is on the list.
Specifications
Fit and size
- Application: alternator, air conditioning, fan and air conditioning, fan, fan and hub
- Quantity per vehicle: 1 or 2, depending on the application
- Cross section: VA
- Top width: 20 mm (.775 in)
- Effective length: 1250 mm (49.22 in)
- Outside circumference: 1267 mm (49.875 in)
- Angle: 36
- Strands: 1
Build and materials
- Type: Truck and Bus V-belt
- Construction: notched
- Belt material: EPDM
- Cord material: polyester
- Country of origin: United States
In the box
One belt. The vehicles take one or two, depending on the application.
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Does the Gates TR28492 fit the 1985-1999 Kenworth K100E 14.0L?
Yes. Gates TR28492 fits the 1985-1999 Kenworth K100E 14.0L and the 1996-1999 International 9800 SBA 14.0L. Use the "Vehicles it fits" section to look up other models and engines.
Does the Gates TR28492 come as one belt or a set?
This listing is one belt. Depending on the application, a vehicle takes one or two, so the quantity needed varies by model and engine.
What size is the Gates TR28492 V-belt?
Gates TR28492 is a VA cross-section belt with a 20 mm (.775 in) top width, 1250 mm (49.22 in) effective length and 1267 mm (49.875 in) outside circumference.
Is the TR28492 a Gates carbon drive belt, or a Gates belt drive system with a Gates belt drive crankset and belt drive chainring?
No. This is a single notched V-belt with an EPDM belt and polyester cord, made for heavy-duty truck, bus and off-road equipment applications. No crankset or chainring is part of this listing.
What are the molded notches on this V-belt for?
The molded notches reduce bending stress, especially on small diameter pulleys, and help dissipate heat from the belt.
