Gates 36271 accessory drive belt tensioner pulley for the 2006-2012 Mitsubishi Eclipse V6 3.8L and other vehicles guides the accessory drive belt as an idler or tensioner pulley. This listing is a single pulley with a smooth backside contact surface.
- DriveAlign belt drive idler/tensioner pulley
- Works as a locked center tensioning pulley, an automatic belt tensioner pulley or an idler pulley
- Steel construction designed to tight manufacturing tolerances
- Resists dirt, salt, chemicals and other under-hood contaminants
- Bearings built to application-specific speed and load requirements for high under-hood temperatures
Quick facts
- Part: Gates 36271 accessory drive belt tensioner pulley
- Fits: 2006-2012 Mitsubishi Eclipse V6 3.8L and other vehicles
- Position: Power steering
- Material: Steel
- Condition: New
A worn pulley can show up as squealing or rumbling near the belt, or as a belt that wobbles. Before you replace the pulley, rule out a stretched belt or a worn bearing on another accessory in the same drive, since those can make noise too.
Fits
It also fits the 2004-2008 and 2010-2011 Mitsubishi Endeavor V6 3.8L and the 2004-2007 Mitsubishi Galant V6 3.8L. The 2004-2007 Mitsubishi Galant V6 3.8L takes one pulley.
Specifications
Fit and size
- Position: Power steering
- Outside diameter: 76 mm
- Width: 22 mm
- Bearing bore inside diameter: 10 mm
- Quantity per vehicle: 1
Build and materials
- Material: Steel
- Contact surface: smooth, backside
- Flanged: no
- Condition: New
- Country of origin: China
In the box
One pulley, one spacer and one washer.
Interchange: 231504 · 8104 · 89504 · 45939 · 49146 · 900200A · MD374878 · 900200
This part cross-references / interchanges with the following part numbers:
36271, 231504, 8104, 89504, 45939, 49146, 900200A, MD374878, 900200
Frequently Asked Questions
Does the Gates 36271 tensioner pulley fit the 2004-2007 Mitsubishi Galant V6 3.8L?
Yes. Gates 36271 fits the 2004-2007 Mitsubishi Galant V6 3.8L, and that car takes one pulley.
Does this tensioner pulley come with a spacer and washer?
Yes. The box holds one pulley, one spacer and one washer.
What size is the Gates 36271 tensioner pulley?
The outside diameter is 76 mm, the width is 22 mm and the bearing bore inside diameter is 10 mm. The contact surface is smooth on the backside.
How can I tell if this tensioner pulley is wearing out?
Squealing or rumbling near the belt, or a belt that wobbles, can come from a worn pulley bearing. A shop can check the belt drive while it runs.
What are the bearings in the 36271 pulley built for?
The bearings meet or exceed OE standards, with speed and load requirements specific to the application, so they can withstand high under-hood temperatures.
