Gates 31R4573 CVT belt for the 2019-2026 John Deere Gator XUV 825M S4 and other vehicles carries engine power through the CVT pulleys. This double-notched belt is made for extreme off-road use.
- Part of the Gates G-Force RedLine line of CVT belts
- Design aimed at acceleration and top speed, with reduced speed ratio and energy loss in extreme off-road environments
- Crack- and wear-resistant construction for demanding applications
- Heat resistance and recovery under severe duty cycles
- Optimized, patented Ethylene Elastomeric (EE) compound that maximizes axial stiffness for higher continuous torque or load
- Tested under extreme conditions in controlled environments and on race vehicles
Quick facts
- Part: Gates 31R4573 CVT belt
- Also called: cvt transmission belt
- Fits: 2019-2026 John Deere Gator XUV 825M S4 and other vehicles
- Position: Drive belt
- Material: EPDM belt, aramid cord
- Condition: New
Slipping, weak acceleration or visible cracking are common signs that a CVT belt is wearing out. With the engine off and cool, look the belt over for damage, and find out what is behind any slipping before you replace it.
Fits
The 2019-2026 John Deere Gator XUV 825M S4 takes one belt, as do the 2025-2026 John Deere Gator XUV 845E, the 2025-2026 John Deere Gator XUV 845M and many other John Deere models. If your vehicle is not named here, look up its model and year in the "Vehicles it fits" section.
Specifications
Fit and size
- Position: drive belt
- Quantity per vehicle: 1
- Cross section designation: RVS-R
- Top width: 33 mm (1.307 in)
- Thickness: 12 mm (0.472 in)
- Outside circumference: 1191 mm (46.902 in)
- Pitch length: 1161.5 mm (45.728 in)
- Pitch width: 31.3 mm (1.23 in)
- Angle: 26°
Build and materials
- Type: power sport specialty high performance CVT belt
- Construction: double notched
- Belt material: EPDM
- Cord material: aramid
- Grade type: OE Improved
- Condition: New
- Country of origin: United States
Interchange: HPX2249 · DBWH8190 · M173005 · M174096 · UC33933 · 31C4573 · 31G4573
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
HPX2249, DBWH8190, M173005, M174096, UC33933, 31C4573, 31G4573, 31R4573
Frequently Asked Questions
Does the Gates 31R4573 belt fit the 2025-2026 John Deere Gator XUV 845E?
Yes, the Gates 31R4573 CVT belt is listed for the 2025-2026 John Deere Gator XUV 845E, which takes one belt; other models are in the "Vehicles it fits" section.
What size is this CVT transmission belt from Gates?
Gates 31R4573 has a top width of 33 mm, a thickness of 12 mm and an outside circumference of 1191 mm. Its pitch length is 1161.5 mm and its cross section designation is RVS-R.
Is the Gates G-Force RedLine belt double notched or smooth?
This belt is double notched. It is made of EPDM with an aramid cord, and it is graded OE Improved.
What should I look for on a worn Gates G-Force RedLine belt?
With the engine off and cool, look over the sides and notches for cracks, glazing or frayed cord. These are common signs of a worn belt.
Does Gates 31R4573 replace part number M173005?
Yes. Gates 31R4573 is listed as a replacement for M173005.
