Gates ANTK147 air intake hose for the 2005-2008 Toyota Corolla 4-cylinder 1.8L carries intake air to the engine.
- Application-specific design for an easy fit and installation
- Rubber hose made with high quality materials for a long service life
- Clamps included with the hose
- Replacement hose intended to help restore normal engine performance
Quick facts
- Part: Gates ANTK147 air intake hose
- Also called: engine air intake hose
- Fits: the 2005-2008 Toyota Corolla 4-cylinder 1.8L
- Material: Rubber
- Condition: New
A cracked, split or collapsed engine air intake hose can let air leak into the intake path, which may show up as a rough idle or a warning light. Before you replace this hose, rule out a loose clamp, a leak at another intake connection or a faulty sensor, because those can produce a similar rough idle.
Fits
Gates ANTK147 is an OE-exact, direct-fit replacement for the 2005-2008 Toyota Corolla 4-cylinder 1.8L and the 2003 Toyota Corolla 4-cylinder 1.8L. The 2003 Toyota Corolla 4-cylinder 1.8L takes one hose, and so does the 2005-2008 model.
Specifications
Fit and size
- Hose centerline length: 11 in (279 mm)
- Inlet diameter: 2.5 in
- Outlet diameter: 2.62 in
- Hose ports: 1
- Quantity per vehicle: 1
Build and materials
- Material: Rubber
- Grade: OE Exact
- Clamps: included
- Condition: New
- Country of origin: China
In the box
One air intake hose with clamps.
Interchange: 696-711
178810D120 · 1788122120
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
696-711, ANTK147, 178810D120, 1788122120
Frequently Asked Questions
Does the Gates ANTK147 fit the 2005-2008 Toyota Corolla 4-cylinder 1.8L?
Yes. Gates ANTK147 is listed for the 2005-2008 Toyota Corolla 4-cylinder 1.8L and for the 2003 Toyota Corolla 4-cylinder 1.8L. Either one takes a single hose.
Does the Gates ANTK147 come with clamps?
Yes. Clamps are included with the Gates ANTK147 hose, so the box holds the hose and its clamps.
Is this Gates air intake hose made of rubber?
Yes. The hose is rubber, with an 11 in (279 mm) centerline length, a 2.5 in inlet and a 2.62 in outlet.
How can I tell if my air intake hose is worn out?
With the engine off and cool, look for cracks, splits, a soft or collapsed section, or a loose connection. A shop can test for intake leaks if the hose looks fine.
Is the Gates ANTK147 an OE-exact hose?
Yes. Its grade is OE Exact, with an application-specific design intended for an easy fit and installation.
