Gates ANTK163 air intake hose for the 2006-2011 Hyundai Accent 4-cylinder 1.6L and other vehicles carries intake air from the mass air flow (MAF) sensor to the throttle body. The hose keeps metered air sealed in that path, and some listings call it an engine air intake hose.
- Rubber construction for a long service life
- 11 in (279 mm) centerline length with two ports
- 2.5 in inlet diameter and 2.5 in outlet diameter
- Helps restore normal airflow and supports normal fuel economy when replacing a worn hose
Quick facts
- Part: Gates ANTK163 air intake hose
- Also called: engine air intake hose
- Fits: 2006-2011 Hyundai Accent 4-cylinder 1.6L and other vehicles
- Position: Mass air flow (MAF) sensor to throttle body
- Material: Rubber
- Condition: New
A cracked, split or soft hose, or a loose connection at either end, can let unmetered air in. That can show up as a rough idle or a check engine light. Before you replace the hose, rule out a loose clamp, a faulty MAF sensor or another air leak, since those can produce similar symptoms.
Fits
It fits the 2006-2011 Hyundai Accent 4-cylinder 1.6L, the 2006-2011 Kia Rio 4-cylinder 1.6L and the 2006-2011 Kia RIO5 4-cylinder 1.6L, and these cars need one hose each. The application-specific, OE-exact design is made for an easy fit.
Specifications
Fit and size
- Position: Mass air flow (MAF) sensor to throttle body
- Quantity per vehicle: 1
- Centerline length: 11 in (279 mm)
- Inlet diameter: 2.5 in
- Outlet diameter: 2.5 in
- Hose ports: 2
Build and materials
- Material: Rubber
- Grade: OE Exact
- Condition: New
- Clamps: not included
- Country of origin: China
In the box
One air intake hose. Clamps are not included, so plan on new clamps.
Interchange: 281381G200
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Is this air intake hose right for the 2006-2011 Kia Rio 4-cylinder 1.6L?
Yes. The Gates ANTK163 fits the 2006-2011 Kia Rio 4-cylinder 1.6L, and the car takes one hose.
Does the Gates air intake hose come with clamps?
No. Clamps are not included, so plan on new ones. The Gates ANTK163 comes as one rubber hose with two ports.
What size are the openings on this air intake hose?
The inlet and the outlet both measure 2.5 in. The centerline length is 11 in (279 mm).
How can I check this air intake hose for wear?
With the engine off and cool, look for cracks, splits or soft spots in the rubber and a loose fit at either end. A shop can test for an intake air leak.
Which other number does the Gates ANTK163 replace?
The number 281381G200 is listed as an interchange for the Gates ANTK163 air intake hose.
