Gates Engine Coolant Bypass Hose,HVAC Heater Hose 12058

Coolant Bypass Hose for 2008-2010 Ford Focus & More - Gates 12058

Be the first to review this product

$37.99

MPN: 12058

UPC: 770075602415

Item Package Quantity: 1

Current Stock:

Quantity:

Adding to cart… The item has been added

Have questions?

Ask an Expert

Gates Engine Coolant Bypass Hose,HVAC Heater Hose P/N:12058

$37.99

Description

Keep coolant flowing where your engine needs it with the Gates Molded Coolant / Heater Hose 12058, a factory-molded, OEM-style hose that drops into the water-outlet-to-pipe position on the 2008-2010 Ford Focus (L4-2.0L) and the 2010-2013 Ford Transit Connect (L4-2.0L). Its pre-formed shape is built to fit today's smaller, tighter engine compartments so the hose routes cleanly without kinking.

EPDM construction: EPDM tube with synthetic fiber knit reinforcement and an EPDM cover.
Electrochemical resistance: engineered to resist electrochemical degradation, a leading cause of hose failure.
Meets SAE spec: conforms to SAE 20R3 Type EC Class D-1 and D-2, with a temperature range of -40°F to 275°F.
Molded fit: 20.03 in (509 mm) centerline length with 0.62 in (16 mm) inside diameter at each end.

Suitable for coolant, water and air applications, and also approved for marine use. Do not use for fuel or oil transfer. Gates recommends replacing hose clamps each time a new coolant hose is installed. Country of origin: United States. This part is listed under both names — coolant bypass hose and heater hose.

Interchange: 4S4Z 8548 A
4S4Z8548A · 18482L · E87940 · 87940 · KM4966 · 13058

Manufacturer's Description

Product Specs

Buyer's Guide

Interchange Part Numbers

This part cross-references / interchanges with the following part numbers:

18482L, 12058, E87940, 87940, 4S4Z 8548 A, KM4966, 13058

Frequently Asked Questions

Will this hose fit my vehicle?

It is a direct-fit replacement for the 2008-2010 Ford Focus (L4-2.0L) and the 2010-2013 Ford Transit Connect (L4-2.0L). Check the Buyer's Guide tab to confirm your application.

What is this hose made of?

It has an EPDM tube, synthetic fiber knit reinforcement, and an EPDM cover, and is engineered to resist electrochemical degradation, a leading cause of hose failure.

What specification does it meet?

It conforms to SAE 20R3 Type EC Class D-1 and D-2, with a temperature range of -40 degrees F to 275 degrees F.

What size is the hose?

It has a 20.03 in (509 mm) centerline length and a 0.62 in (16 mm) inside diameter at each end, and is factory-molded to route in the water-outlet-to-pipe position.

Can I use it for fuel or oil lines?

No. It is approved for coolant, water, air, and marine applications only. Gates also recommends replacing hose clamps each time a new coolant hose is installed.