Gates 34927 thermostat for the 2015-2020 Ford Mustang V8 5.0L and the 2016-2019 Mustang V8 5.2L controls engine temperature from an integrated thermostat housing. This engine coolant thermostat opens and closes to hold the engine at its operating temperature.
- All-in-one bolt-on design for a complete job
- Precision temperature regulation, including application-specific adaptive MAP-control
- Integrated housing for accurate temperature control that helps the engine run efficiently
- Starts to open at 192°F (89°C)
Quick facts
- Part: Gates 34927 thermostat
- Also called: engine coolant thermostat
- Fits: the 2015-2020 Ford Mustang V8 5.0L and the 2016-2019 Mustang V8 5.2L
- Condition: New
An engine that runs hot, warms up slowly or shows a wandering temperature gauge can mean a stuck thermostat. A weak water pump, a low coolant level or a failing cooling fan can be behind those signs too, so find the cause before you buy. If the thermostat is at fault, this unit replaces it.
Fits
It is a thermostat for the 2015-2020 Ford Mustang V8 5.0L and the 2016-2019 Mustang V8 5.2L, and each engine takes one. It meets or exceeds OE standards for fit, form and performance.
Specifications
Fit and size
- Quantity per vehicle: 1
- Outlet inside diameter: 1.2 in and 0.92 in
- Outlet outside diameter: 1.28 in and 1.5 in
- Bolt holes: 2
Build and materials
- Type: integrated housing thermostat
- Grade: OE Exact
- Seal quantity: 1
- Jiggle pin check valve: not included
- Electric: No
- Condition: New
- Country of origin: China
In the box
One thermostat with its insert, seal and housing. No jiggle pin check valve is included.
Interchange: BR3Z 8A586 M
Frequently Asked Questions
Is the Gates 34927 the right thermostat for the 2015-2020 Ford Mustang V8 5.0L?
Yes. The Gates 34927 fits the 2015-2020 Ford Mustang V8 5.0L and the 2016-2019 Mustang V8 5.2L, with one unit per engine.
Does the Gates 34927 come with a seal and housing?
Yes. It comes as one bolt-on unit with the thermostat, insert, seal and housing. A jiggle pin check valve is not included.
At what temperature does this Gates integrated housing thermostat start to open?
This thermostat starts to open at 192°F (89°C).
What can a failing integrated housing thermostat look like?
Overheating, a slow warm-up or a gauge that wanders can be signs of a sticking thermostat. A coolant leak at the housing, seen with the engine cool, is another.
What size is the outlet on the Gates 34927 thermostat housing?
The outlet has inside diameters of 1.2 in and 0.92 in and outside diameters of 1.28 in and 1.5 in. The housing has two bolt holes.
