Keep crankcase blow-by vapors moving along their intended path with the Gates engine crankcase breather hose (EMH082). This molded emission-control hose routes from the PCV valve to the intake, and it drops in as a direct replacement for the 2018-2021 Jeep Cherokee (V6-3.2L) and the 2020-2021 Ram ProMaster 1500, 2500, and 3500 (V6-3.6L).
Also known as a crankcase vent hose, it carries oil-laden crankcase gases toward the intake so they can be drawn back in and re-burned instead of escaping. If a cracked, hardened, or collapsed hose is the cause of a ventilation leak or a rough-running emission system, this OE-exact replacement helps return the path to proper operation.
- Molded plastic and rubber construction: resistant to fuel vapors and oil.
- Meets SAE J30R7 specifications: OE-exact grade replacement hose.
- Wide temperature range: rated from -40°F to +275°F (-40°C to +135°C).
- Push-in ends: a direct replacement built for exact fit and easy installation; mounting hardware is not included.
It measures about 12.25 in (311 mm) centerline length with inside diameters of .58 in (15 mm) and .7 in (18 mm). No PCV valve or protective sleeve is included. Country of origin: China.
Interchange: 68342017AA · 683422017AA
This part cross-references / interchanges with the following part numbers:
EMH082, 68342017AA, 683422017AA
Frequently Asked Questions
What does the Gates EMH082 crankcase breather hose do?
It routes oil-laden crankcase blow-by vapors from the PCV valve to the intake so they are drawn back in and re-burned, helping return the crankcase ventilation system to proper operation.
What vehicles does this hose fit?
It's a direct replacement for the 2018-2021 Jeep Cherokee (V6-3.2L) and the 2020-2021 Ram ProMaster 1500, 2500, and 3500 (V6-3.6L). Check the "Vehicles it fits" section to confirm your vehicle.
Does this crankcase vent hose include a PCV valve or hardware?
No. This listing is for one hose only — no PCV valve, protective sleeve, or mounting hardware is included.
What is the hose made of and rated to?
It's molded from plastic and rubber, resists fuel vapors and oil, meets SAE J30R7 specifications, and is rated from -40°F to +275°F (-40°C to +135°C).
What part numbers does the EMH082 replace?
It cross-references 68342017AA and 683422017AA.
