Gates Engine Crankcase Breather Hose P/N:EMH362
Gates EMH218 crankcase breather hose for the 2008-2010 Volkswagen Jetta 4-cylinder 2.0L and other vehicles carries crankcase vapors through the engine's emission and ventilation system. It connects the PCV valve to a tube and the oil separator to the air cleaner or intake tube.
Cracks, a soft or swollen hose, or a rough idle can point to a worn hose. These signs alone do not prove the hose is the problem; a worn PCV valve is another common cause. Each engine takes one hose.
This hose is an OE-exact direct replacement for the 2008-2010 Volkswagen Jetta 4-cylinder 2.0L, the 2009-2017 Volkswagen Tiguan 4-cylinder 2.0L and the 2008-2010 Volkswagen Passat 4-cylinder 2.0L, made for an exact fit and easy installation. If your car is not named here, open the "Vehicles it fits" section to check your exact model and engine.
Fit and size
Build and materials
One crankcase breather hose with a protective sleeve. The PCV valve and hardware are not included, so plan on new hardware if you need it, since old pieces may not be reusable.
Interchange: ABV0165 · 06J103213D
This part cross-references / interchanges with the following part numbers:
Is this crankcase breather hose for the 2008-2010 Volkswagen Passat 4-cylinder 2.0L?
Yes, Gates EMH218 is listed for the 2008-2010 Volkswagen Passat 4-cylinder 2.0L, which takes one hose; for other models and engines, open the "Vehicles it fits" section.
Does the Gates EMH218 hose come with a PCV valve or clamps?
No, Gates EMH218 is one hose with a protective sleeve, and the PCV valve and hardware are not included.
What are the inside diameter and length of this crankcase breather hose?
The inside diameter is 16 mm (0.625 in) and the centerline length is 343 mm (13.5 in). It has push-in and clip-on ends.
How can I check a crankcase vent hose for wear?
With the engine off and cool, look for cracks, a soft or swollen hose, or oil residue at the ends. A shop can test the rest of the ventilation system.
What is this crankcase breather hose made of, and what temperatures can it take?
The material is plastic, molded with push-in and clip-on ends. It is rated for -40 °F to +275 °F (-40 °C to +135 °C) and resists fuel vapors and oil.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.