Gates EMH249 right crankcase breather hose for the 2008-2014 BMW X6 V8 4.4L and other vehicles carries crankcase vapors between the valve cover and the intake tube. Also known as a crankcase vent hose, it is a molded plastic hose for the emission and ventilation system.
- Resistant to fuel vapors and oil
- Meets SAE J30R7 specifications
- Temperature range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
- Molded hose with one branch and a 267 mm centerline length
Quick facts
- Part: Gates EMH249 crankcase breather hose
- Also called: crankcase vent hose
- Fits: 2008-2014 BMW X6 V8 4.4L and other vehicles
- Position: Valve cover to intake tube (right)
- Material: Plastic
- Condition: New
A cracked or soft hose, oil film around the clip-on ends or a rough idle can mean this hose is worn, though a leaking valve cover gasket or a loose intake boot may be the real source, so find the cause before replacing it.
Fits
This listing is one hose for the right side; the left side is a separate part. It is a direct-fit replacement for a wide range of BMW models, including the 2011-2013 BMW 550i V8 4.4L and the 2010-2013 BMW 550i GT V8 4.4L. Open the "Vehicles it fits" section to check your exact model and engine.
Specifications
Fit and size
- Position: Valve cover to intake tube (right)
- Quantity per vehicle: 1
- Inside diameter: 5 mm (.187 in) and 16 mm (.625 in)
- Centerline length: 267 mm (10.5 in)
- Branch quantity: 1
- Quick-connect fittings: 2
Build and materials
- Material: Plastic
- Construction: Molded
- End type: Clip on
- Grade: OE Exact
- PCV valve: included
- Condition: New
- Country of origin: China
In the box
One crankcase breather hose with its PCV valve. Hardware and a protective sleeve are not included, so plan on new hardware if you need it.
Installation notes
- Clip-on ends with two quick-connect fittings.
- Direct replacement design for an exact fit and easy installation.
Interchange: 11157575642 · 11157646086 · ABV0193
This part cross-references / interchanges with the following part numbers:
11157575642, 11157646086, EMH249, ABV0193
Frequently Asked Questions
Does the Gates EMH249 crankcase breather hose fit the 2008-2014 BMW X6 V8 4.4L?
Yes, Gates EMH249 is listed for the 2008-2014 BMW X6 V8 4.4L and the 2011-2013 BMW 550i V8 4.4L. Open the "Vehicles it fits" section to check your exact model and engine.
Does the Gates EMH249 hose come with the PCV valve?
Yes, Gates EMH249 includes the PCV valve with the hose. Hardware and a protective sleeve are not included.
What are the inside diameters of this breather hose?
Gates EMH249 has inside diameters of 5 mm (.187 in) and 16 mm (.625 in), with a centerline length of 267 mm (10.5 in).
How can I tell if a crankcase breather hose is worn out?
With the engine off and cool, look for cracks, a soft or swollen hose, or an oil film at the clip-on ends. A rough idle has other possible causes too, so a shop can test it.
Is Gates EMH249 a replacement for number 11157575642?
Yes, 11157575642 is on the interchange list for Gates EMH249, the right-side crankcase breather hose.
