Gates 41083BHWT water pump for the 2010-2012 Ford Fusion V6 3.0L and other vehicles circulates coolant through the engine to carry heat away.
- Cast aluminum housing with a plastic impeller
- 100 percent functional test of seals and bearings
- 100 percent leakage test of the casting and the assembled water pump
- Driven by the accessory belt rather than the timing belt
Quick facts
- Part: Gates 41083BHWT water pump
- Also called: engine water pump
- Fits: 2010-2012 Ford Fusion V6 3.0L and other vehicles
- Material: Cast aluminum housing, plastic impeller
- Condition: New
A worn pump can leak coolant, whine or grind from the bearing, or let the engine run hot. Before replacing it, look around the pump with the engine off and cool for coolant stains or dried residue; a hose or thermostat leak can look similar, and a shop can pressure-test the system. This listing is one pump, and each engine takes one.
Fits
As a water pump for the 2009-2012 Ford Escape V6 3.0L and the 2009-2011 Mazda Tribute V6 3.0L, it fits and performs to OE specifications and requirements. If your car isn't named here, look up its year, model and engine in the "Vehicles it fits" section on this page.
Specifications
Fit and size
- Quantity per vehicle: 1
- Outlets: 4
- Drive type: accessory belt
Build and materials
- Housing material: cast aluminum
- Impeller material: plastic
- Impeller rotation: reverse
- Condition: new
- Warranty: Gates limited lifetime warranty
- Country of origin: China
In the box
One water pump with its pulley, back housing, thermostat and thermostat housing, and 2 seals. A fan clutch is not included.
Interchange: 9L8Z 8501 B · 9L8Z 8501 C · 125-3240AT · PW 500
941083BHWT
This part cross-references / interchanges with the following part numbers:
9L8Z 8501 B, 9L8Z 8501 C, 125-3240AT, PW 500, 41083BHWT, 941083BHWT
Frequently Asked Questions
Can I use this as a water pump replacement on a 2009-2012 Ford Escape V6 3.0L?
Yes. The Gates 41083BHWT fits the 2009-2012 Ford Escape V6 3.0L. For another car, look up its year and engine in the "Vehicles it fits" section.
Is this the Ford Fusion pump for 2010-2012 cars with the V6 3.0L?
Yes. Gates 41083BHWT is a water pump for the 2010-2012 Ford Fusion V6 3.0L, and the engine takes one.
Is this engine water pump driven by the timing belt?
No. The Gates 41083BHWT is driven by the accessory belt, not the timing belt.
Does this water pump come with the thermostat and its housing?
Yes. This water pump comes with the back housing, thermostat and thermostat housing, pulley and 2 seals. A fan clutch is not included.
Are the seals and bearings tested on this water pump?
Yes. Seals and bearings get a 100 percent functional test, and the casting and the assembled pump get a 100 percent leakage test.
