Gates 41206 water pump for the 2010-2013 Hyundai Genesis Coupe 4-cylinder 2.0L circulates coolant through the engine and radiator to carry heat away. This new Gates water pump runs on the accessory belt rather than the timing belt.
- 100 percent leakage test of both the casting and the assembled pump
- 100 percent functional test of the seals and bearings
- Cast aluminum housing with a stamped steel impeller
- Standard impeller rotation
Quick facts
- Part: Gates 41206 water pump
- Also called: engine water pump
- Fits: 2010-2013 Hyundai Genesis Coupe 4-cylinder 2.0L
- Material: cast aluminum housing, stamped steel impeller
- Condition: New
A coolant leak at the pump, a whining or grinding noise from the front of the engine, or an engine that runs hot can mean the pump is worn, though a stuck thermostat or a leaking radiator hose can be behind the same signs, so find the cause before replacing anything.
Fits
It fits the 2010-2013 Hyundai Genesis Coupe 4-cylinder 2.0L, which takes one pump. Fit and performance follow OE specifications and requirements.
Specifications
Fit and size
- Quantity per vehicle: 1
- Drive type: Accessory belt
- Impeller rotation: Standard
Build and materials
- Housing material: Cast aluminum
- Impeller material: Stamped steel
- Condition: New
- Warranty: Gates limited lifetime warranty
- Country of origin: China
In the box
One water pump and one gasket. The pulley, fan clutch, back housing, and thermostat and housing are not included.
Interchange: 146-7360
2521006 · WPK826 · W2865M · AWP2865 · 251202C400 · 941206
This part cross-references / interchanges with the following part numbers:
2521006, WPK826, W2865M, AWP2865, 146-7360, 251202C400, 41206, 941206
Frequently Asked Questions
Is Gates 41206 the water pump for the 2010-2013 Hyundai Genesis Coupe 4-cylinder 2.0L?
Yes. Gates 41206 fits the 2010-2013 Hyundai Genesis Coupe 4-cylinder 2.0L, and that car takes one pump.
Does this water pump come with a gasket or a pulley?
Gates 41206 comes with a gasket. The pulley, fan clutch, back housing, and thermostat and housing are not included.
Is this engine water pump driven by the timing belt?
No. This pump runs on the accessory belt. Its housing is cast aluminum and its impeller is stamped steel.
How is each Gates pump tested?
The seals and bearings get a 100 percent functional test. The casting and the fully assembled pump each get a 100 percent leakage test.
How can I tell if this water pump is going bad?
Coolant seepage near the pump, a whining or grinding noise from the front of the engine, or rising engine temperature can be signs of a worn pump. A shop can test the cooling system to confirm.
