Gates Engine Auxiliary Water Pump,Engine Water Pump P/N:43328BH
Gates 42025 water pump for the 2008-2010 Ford F-250 Super Duty V8 6.4L and other vehicles circulates coolant through the engine to carry heat away. This Gates water pump is a new part and is driven by an accessory belt.
A leak at the pump, a whining or grinding noise or an engine that runs hot can mean the engine water pump is wearing out. A stuck thermostat, a leaking hose or a weak radiator cap can run an engine hot too, so find the source of the overheating before you buy a pump.
The 2008-2010 Ford F-250 Super Duty V8 6.4L, the 2008-2010 Ford F-350 Super Duty V8 6.4L and the 2008-2010 Ford F-450 Super Duty V8 6.4L all take this pump, and it fits other vehicles as well. It fits and performs to OE specifications and requirements. Each engine takes one pump.
Fit and size
Build and materials
One water pump and one seal. The pulley, fan clutch, thermostat and housing, and back housing are not included.
Interchange: 252-916 · WP-2139 · 51-2474 · CWP-2139 · 18-1917 · 3-20953 · 8C3Z 8501 B · 125-3000 · PW 482
AW6157 · 20953 · 96198HD · 5523332 · 58678 · T3127 · W2139M · DP1309 · NP1880 · CP6157 · PWP23332 · US0076 · US76 · CVC2139 · 942025
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this the water pump for the 2008-2010 Ford F-350 Super Duty V8 6.4L?
Yes. Gates 42025 fits the 2008-2010 Ford F-350 Super Duty V8 6.4L and other vehicles. If your truck isn't named here, look it up in the "Vehicles it fits" section.
Does this water pump come with a pulley or thermostat housing?
No. Gates 42025 comes as a water pump with its seal. The pulley, fan clutch, thermostat and housing, and back housing are not included.
What are the housing and impeller of the Gates pump made of?
The housing is cast aluminum and the impeller is plastic. The impeller turns in reverse rotation, and the pump is driven by an accessory belt.
How can I tell if my water pump is wearing out?
Coolant residue around the pump (look with the engine off and cool), a whine or grinding noise, or a climbing temperature gauge can point to a worn pump. A shop can pressure-test the cooling system.
How is each new Gates 42025 tested?
Every pump gets a 100 percent functional test of its seals and bearings. The casting and the fully assembled pump each get a 100 percent leakage test.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.