Gates 42318HD water pump for the 2006 IC Corporation FE School Bus 6-cylinder 7.6L and other vehicles circulates coolant through the engine. This new engine water pump is driven by the accessory belt.
- Heavy-duty design for severe and rigorous conditions
- Cast iron housing and stamped steel impeller
- Unitized bearings and seals, each tested at 100 percent
- 100 percent leakage test on both the casting and the assembled pump
- Computerized machined surfaces for proper fit and sealing
- Gates Heavy-Duty Water Pumps line, marked by an HD suffix on the part number
Quick facts
- Part: Gates 42318HD water pump
- Also called: engine water pump
- Fits: 2006 IC Corporation FE School Bus 6-cylinder 7.6L and other vehicles
- Material: Cast iron housing, stamped steel impeller
- Condition: New
Coolant residue around the pump, a whine or grinding noise at the belt drive, or an engine that runs hot can mean the pump is wearing out. A hose, thermostat or radiator may produce those symptoms too, so with the engine off and cool, look over the pump body for stains or crusty trails first.
Fits
This water pump is a direct-fit replacement for the 2006 IC Corporation FE School Bus 6-cylinder 7.6L, the 2002-2005 International 4400 6-cylinder 7.6L or 8.7L and the 2002-2005 International 4400LP 6-cylinder 7.6L or 8.7L, and each engine takes one pump. If your truck or bus is not named here, look it up in the "Vehicles it fits" section by its year and engine.
Specifications
Fit and size
- Quantity per application: 1
- Outlets: 2
- Drive type: accessory belt
- Timing belt driven: no
- Impeller rotation: standard
Build and materials
- Housing material: cast iron
- Impeller material: stamped steel
- Condition: new
- Gates warranty: 18 months or 150,000 miles/5,400 hours, whichever comes first
- Country of origin: China
In the box
One water pump, one bushing and one seal. A pulley, back housing, thermostat and housing, and fan clutch are not included.
Frequently Asked Questions
Will the Gates 42318HD fit a 2006 IC Corporation FE School Bus with the 6-cylinder 7.6L engine?
Yes. Gates 42318HD is a direct-fit water pump for the 2006 IC Corporation FE School Bus 6-cylinder 7.6L, and the engine takes one pump.
Is this water pump right for the 2002-2005 International 4400 with the 6-cylinder 7.6L or 8.7L engine?
Yes. It fits the 2002-2005 International 4400 6-cylinder 7.6L or 8.7L. Other vehicles are covered in the "Vehicles it fits" section.
Does the Gates 42318HD come with a pulley?
No. The box holds the water pump, a bushing and a seal. The pulley, back housing, thermostat and housing, and fan clutch are not included.
Does the HD in 42318HD mean this is one of the Gates water pumps made for heavy-duty service?
Yes. Gates heavy-duty water pumps carry an HD suffix on the part number, and this pump is designed for severe and rigorous conditions.
Is the 42318HD water pump driven by the timing belt?
No. Gates 42318HD is driven by the accessory belt, not the timing belt. The housing is cast iron and the impeller is stamped steel.
