Gates 45007 water pump for the 1994-1995 Ford F-250 V8 7.3L and other vehicles circulates coolant through the engine to carry heat away. This Gates water pump is a new engine water pump with a cast aluminum housing.
- 100 percent functional test of the seals and bearings, and 100 percent leakage test of the casting and the assembled pump
- Cast aluminum housing with a stamped steel impeller
- Two outlets and standard impeller rotation
- Accessory belt drive, not timing-belt driven
Quick facts
- Part: Gates 45007 water pump
- Also called: engine water pump
- Fits: 1994-1995 Ford F-250 V8 7.3L and other vehicles
- Material: cast aluminum housing, stamped steel impeller
- Condition: New
Coolant stains or crusty residue near the pump, a whine or grinding from the bearing, or an engine that runs hot can mean the pump is wearing out. Each of those signs can have other causes, so with the engine off and cool, look over the pump and nearby hoses for wet spots before you replace anything. The engine takes one pump.
Fits
The vehicles it fits include the 1994-1995 Ford F-250 V8 7.3L, the 1994-1997 Amtran RE and the 1996 International/Navistar 3000FE. Fit and performance follow OE specifications.
Specifications
Fit and size
- Quantity per vehicle: 1
- Outlets: 2
- Impeller rotation: Standard
- Drive type: Accessory belt
Build and materials
- Housing material: Cast aluminum
- Impeller material: Stamped steel
- Condition: New
- Warranty: Gates limited lifetime warranty
- Country of origin: China
In the box
One water pump, one seal and seven bolts. The pulley, back housing, thermostat and housing, and fan clutch are not included.
Frequently Asked Questions
Is Gates 45007 the right Ford F-250 water pump for the 1994-1995 model with the V8 7.3L?
Yes, Gates 45007 fits the 1994-1995 Ford F-250 V8 7.3L. If your vehicle is a different one, look it up in the "Vehicles it fits" section on this page.
Does the Gates 45007 come with a pulley, or just the pump, seal and bolts?
No pulley comes with it. The Gates 45007 box holds the pump, a seal and seven bolts; the pulley, back housing, thermostat and housing, and fan clutch are not included.
Is the Gates pump driven by the accessory belt or the timing belt?
Accessory belt. This Gates 45007 pump is not timing-belt driven, and it has two outlets and a stamped steel impeller with standard rotation.
What does a failing water pump bearing or seal look and sound like?
Coolant stains or crusty residue near the pump can mean a seal leak, and a whine or grinding from the pump area can mean a worn bearing. A shop can confirm either one.
How is the Gates 45007 water pump tested?
Gates tests the seals and bearings for function and the casting and finished pump for leaks, all at 100 percent. The pump carries a Gates limited lifetime warranty.
