Heater Hose for 2007-2009 Honda CR-V - Gates 12225

$11.99

Vehicles this part fits

    Part number: 12225
    UPC: 770075736691
    Condition: New
    Weight: 0.60 LBS
    Item Package Quantity: 1
    $11.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:12225
    Gates HVAC Heater Hose P/N:12225
    $11.99
    $11.99

    Gates 12225 heater hose for the 2007-2009 Honda CR-V 4-cylinder 2.4L carries hot coolant between the engine and the heater core. This Gates heater hose is molded at the factory to fit today's smaller, tighter engine compartments.

    • EPDM tube, synthetic fiber knit reinforcement and EPDM cover
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
    • Temperature range of -40°F to 275°F (-40°C to 135°C)
    • Usable for coolant, water and air applications, and approved for marine applications

    Quick facts

    • Part: Gates 12225 heater hose
    • Also called: HVAC heater hose
    • Fits: 2007-2009 Honda CR-V 4-cylinder 2.4L
    • Position: Connector to engine
    • Material: EPDM
    • Condition: New

    Cracks, swelling or coolant residue at the hose ends can mean a heater hose is wearing out. With the engine off and cool, look along the whole hose first, since a leak can also come from a clamp or a nearby fitting. If the hose is the cause, this one replaces it.

    Fits

    It fits the 2007-2009 Honda CR-V 4-cylinder 2.4L (L4-2.4L). This listing is one hose for the connector-to-engine position, and the vehicle takes one.

    Specifications

    Fit and size

    • Position: connector to engine
    • Quantity per vehicle: 1
    • Centerline length: 14.2 in (361 mm)
    • End 1 inside diameter: 0.62 in (16 mm)
    • End 2 inside diameter: 0.62 in (16 mm)

    Build and materials

    • Type: molded
    • Material: EPDM
    • Condition: New
    • Country of origin: United States

    Installation notes

    • Replace the hose clamps each time a new coolant hose is installed.

    Interchange: 14929S · 79721SWAA00 · 13225

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    14929S, 79721SWAA00, 12225, 13225

    Frequently Asked Questions

    Does the Gates 12225 heater hose fit the 2007-2009 Honda CR-V 4-cylinder 2.4L?

    Yes. Gates 12225 is made for the 2007-2009 Honda CR-V 4-cylinder 2.4L (L4-2.4L) in the connector-to-engine position, and the vehicle takes one.

    What are the inside diameter and length of this Gates molded heater hose?

    The Gates 12225 has a 16 mm (0.62 in) inside diameter at both ends and a centerline length of 361 mm (14.2 in). It is molded EPDM.

    Is this HVAC heater hose okay for fuel or oil lines?

    No. Do not use this heater hose for fuel or oil transfer. It is meant for coolant, water and air applications and is also approved for marine use.

    What does a worn EPDM heater hose look like?

    With the engine off and cool, cracks, swollen or soft spots, or coolant residue at the ends can mean the hose is wearing out. A leak you cannot trace is best left to a shop.

    Should I use new clamps when I install the Gates 12225?

    Yes. New hose clamps are recommended every time a coolant hose is replaced, so plan on a fresh set when you fit this Gates 12225.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review