Gates HVAC Heater Hose P/N:18061

Be the first to review this product

$11.99

MPN: 18061

UPC: 770075511113

Item Package Quantity: 1

Current Stock:

Quantity:

Adding to cart… The item has been added

Have questions?

Ask an Expert

Gates HVAC Heater Hose P/N:18061

$11.99

Description

Route coolant cleanly from the pipe to the inlet tee with the Gates Small I.D. Molded Heater Hose 18061. This factory-molded, OEM-style hose is shaped to fit today's smaller, tighter engine compartments, and it drops in as a direct-fit replacement for the 2010-2013 Acura MDX (V6-3.7L) in the pipe-to-inlet-tee position.

Molded EPDM construction: EPDM tube, synthetic fiber knit reinforcement, and an EPDM cover, carrying all the quality features of Gates molded coolant hose and built similar to OEM specifications.
Electrochemical resistance: engineered to resist electrochemical degradation — the leading cause of hose failure.
Rated to spec: meets SAE 20R3 Type EC Class D-1 and D-2 specifications, with a temperature range of -40°F to 275°F.
Versatile use: approved for coolant, water, and air applications, including marine use.

Measured specs: a 23.9 in (607 mm) centerline length with .63 in (16 mm) inside diameters at each end. Gates recommends replacing hose clamps each time a new coolant hose is installed. Caution: do not use for fuel or oil transfer applications. Country of origin: United States.

Interchange: 18433L · 64559 · F10696 · 79721STXA02 · 10061

Manufacturer's Description

Product Specs

Buyer's Guide

Interchange Part Numbers

This part cross-references / interchanges with the following part numbers:

18433L, 18061, 64559, F10696, 79721STXA02, 10061

Frequently Asked Questions

What vehicle does the Gates 18061 heater hose fit?

It is a direct-fit replacement for the 2010-2013 Acura MDX with the V6-3.7L engine, installing in the pipe-to-inlet-tee position. Check the Buyer's Guide tab to confirm fitment.

What is this hose made of?

It has an EPDM tube, synthetic fiber knit reinforcement, and an EPDM cover. It carries all the quality features of Gates molded coolant hose and is built similar to OEM specifications.

What are the hose dimensions?

It has a centerline length of 23.9 in (607 mm) with a .63 in (16 mm) inside diameter at each end. Its molded shape fits smaller, tighter engine compartments.

What temperature and specifications does it meet?

It meets SAE 20R3 Type EC Class D-1 and D-2 specifications and is rated for a temperature range of -40°F to 275°F. It also resists electrochemical degradation.

Can I reuse the old hose clamps?

Gates recommends replacing the hose clamps each time a new coolant hose is installed. Do not use this hose for fuel or oil transfer applications.